Reference Guide

convert-aos-ap
convert-aos-ap <mode> <controller-IP>
Description
This command allows you to provision a W-IAP as a Campus AP or Remote AP in a controller-based network, or as
a standalone AP.
Syntax
Parameter Description Range
<mode>
Provisions the W-IAP as remote AP or campus AP in a
controller-based network.
W-IAP, CAP.
<controller-IP>
Allows you to specify the IP address of the controller to which
the Remote AP or Campus AP will be connected.
—
Usage Guidelines
Before converting a W-IAP, ensure that both the W-IAP and controller are configured to operate in the same
regulatory domain. A W-IAP can be converted to a Campus AP and Remote AP only if the controller is running
ArubaOS 6.1.4 or later.
Example
The following command allows you to convert a W-IAP to a remote AP:
(Instant AP)# convert-aos-ap W-IAP 192.0.2.5
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide convert-aos-ap | 59