Reference Guide

62 | deny-inter-user-bridging Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
deny-inter-user-bridging
deny-inter-user-bridging
no…
Description
This command disables bridging traffic between two clients of a W-IAP on the same VLAN. Bridging traffic between
the clients will be sent to the upstream device to make the forwarding decision.
Syntax
Parameter Description
deny-inter-user-bridging
Prevents the inter-user bridging.
no…
Removes the configuration.
Usage Guidelines
Use this command if you have security and traffic management policies defined for upstream devices.
Example
The following command disables inter-user bridging:
(Instant AP)(config)# deny-inter-user-bridging
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode