Reference Guide

64 | device-id Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
device-id
device-id <device>
Description
This command assigns an ID for the AP device.
Syntax
Parameter Description
device-id <device>
Configures an ID for the W-IAP device.
Usage Guidelines
Use this command to configure a device identification.
Example
The following example configures a device ID:
(Instant AP)(config)# device-ID Device1
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode