Reference Guide

66 | disconnect-user Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
disconnect-user
disconnect-user {<addr>|all|mac <mac>| network <name>}
Description
This command disconnects the clients from a W-IAP.
Syntax
Parameter Description
<addr>
Allows you to disconnect a client by specifying the IP address of the client.
all
Disconnects all users associated with a W-IAP.
mac <mac>
Allows you to disconnect a client by specifying the MAC address of the client.
network <name>
Allows you to disconnect the clients connected to a specific network.
Example
The following example disconnects all clients associated with a W-IAP:
(Instant AP)# disconnect-user
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode