Reference Guide

dynamic-cpu-mgmt
dynamic-cpu-mgmt {auto| disable| enable}
Description
This command enables or disables the dynamic CPU management feature, to manage resources across different
functions performed by a W-IAP.
Syntax
Parameter Description
auto
Configures the W-IAP to automatically enable or disable CPU management feature
during run-time. When configured, the W-IAP determines the need for enabling or
disabling CPU management, based on the real-time load calculations taking into
account all different functions that the CPU needs to perform.
The auto option is the default and recommended setting.
disable
Disables CPU management on all APs, typically for small networks. This setting
protects the user experience.
enable
Enables the CPU management feature. When configured, the client and network
management functions are protected. This setting helps in large networks with a
high client density.
Usage Guidelines
Use this command to enable or disable resource management across different functions performed by a W-IAP.
Example
The following example enables the automatic enabling or disabling of CPU management:
(Instant AP)(config)# dynamic-cpu-mgmt auto
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.4.0.0 This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide dynamic-cpu-mgmt | 69