Reference Guide
70 | dynamic-radius-proxy Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
dynamic-radius-proxy
dynamic-radius-proxy
no…
Description
This command enables the use of IP Address of the Virtual Controller for communication with external RADIUS
servers.
Syntax
Command/Parameter Description
dynamic-radius-proxy
Enables dynamic RADIUS proxy feature to allow the Virtual
Controller network to use the IPaddress of the Virtual Controller
when communicating with the external RADIUS servers.
no…
Removes the configuration.
Usage Guidelines
Ensure that you set the Virtual Controller IP address as a NAS client in the RADIUS server when Dynamic RADIUS
proxy is enabled.
Example
The following example enables the dynamic RADIUS proxy feature:
(Instant AP)(config)# dynamic-radius-proxy
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode