Reference Guide

72 | enet0-bridging Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
enet0-bridging
enet0-bridging
Description
This command allows you to use all ports on the APs as downlink ports.
Usage Guidelines
Use this command for W-IAP models that have only one Ethernet port enabled. When Eth0 bridging is configured,
ensure that the uplink for each W-IAP is mesh link, Wi-Fi, or 3G/4G.
Example
The following command enables Eth0 bridging:
(Instant AP)# enet0-bridging
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode