Reference Guide

76 | enet3-port-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
enet3-port-profile
enet3-port-profile <profile>
Description
This command assigns a wired profile to the Ethernet 3 port on a W-IAP.
Syntax
Parameter Description
enet3-port-profile <profile>
Assigns a wired profile to the Ethernet 3 interface port.
Usage Guidelines
Use this command to assign a wired profile to the Ethernet 3 port to activate the wired profile.
Example
The following command assigns a wired profile to the Ethernet 3 port:
(Instant AP)(config)# enet3-port-profile <name>
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode