Reference Guide

78 | extended-ssid Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
extended-ssid
extended-ssid
no…
Description
This command enables the configuration of additional WLAN SSIDs. Extended SSID is enabled by default in the
factory default settings of Instant APs. Disabling the extended ssid option in the factory default mode will not take
effect.
Syntax
Command/Parameter Description
extended-ssid
Enables the users to configure additional SSIDs.
no…
Removes the configuration.
Usage Guidelines
Use this command to create additional SSIDs. By default, you can create up to six WLAN SSIDs. With the
Extended SSID option enabled, you can create up to 16 WLANs. The following W-IAPs support 16 WLANs:
l W-IAP3WNP
l W-IAP134
l W-IAP135
The number of SSIDs that become active on each W-IAP depends on the W-IAP platform.
Example
The following example enables the configuration of extended SSIDs:
(Instant AP)(config)# extended-ssid
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode