Reference Guide

gre per-ap-tunnel

no…

Description

This command configures a generic routing encapsulation (GRE) tunnel from each W-IAP to the VPN/GRE Endpoint

rather than the tunnels created just from the Virtual Controller.

Syntax

Parameter Description

gre per-ap-tunnel

Creates a GRE tunnel from the W-IAP to the VPN/GRE endpoint.

no…

Removes the configuration.

Usage Guidelines

Use this command to allow the traffic to be sent to the corporate network through a Layer-2 GRE tunnel from the W-

IAP itself. When a GRE tunnel per W-IAP is created, the traffic need not be forwarded through the Virtual Controller.

Example

The following example creates a GRE tunnel for the W-IAP:

(Instant AP)(config)# gre per-ap-tunnel

(Instant AP)(config)# end

(Instant AP)# commit apply

Command History

Version Description

Dell Networking W-Series Instant 6.2.1.0-

3.3

This command is introduced.

Command Information

W-IAP Platform Command Mode

All platforms

Configuration mode

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide gre per-ap-tunnel | 85