Reference Guide

hotspot anqp-domain-name-profile
hotspot anqp-domain-name-profile <profile-name>
domain-name <domain-name>
enable
no…
Description
This command defines the domain name to be sent in an Access Network Query Protocol (ANQP) information
element in a Generic Advertisement Service (GAS) query response.
Syntax
Parameter Description
hotspot anqp-domain-name-profile
<profile-name>
Creates a domain profile.
domain-name <domain-name>
Configures a domain name of the hotspot operator.
enable
Enables the configuration profile.
no…
Removes the existing configuration
Usage Guidelines
Use this command to configure a domain name in the ANQP Domain Name profile. If a client uses the Generic
Advertisement Service (GAS) to post an ANQP query to a W-IAP, the W-IAP will return an ANQP Information
Element with the domain name when this profile is associated with a hotspot profile and enabled on a WLAN SSID
profile.
Example
The following command defines a domain name for the ANQP domain name profile:
(Instant AP)(config)# hotspot anqp-domain-name-profile domain1
(Instant AP)(domain-name "domain1")# domain-name example.com
(Instant AP)(domain-name "domain1")# enable
(Instant AP)(domain-name "domain1")# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode and the ANQP domain profile configuration
sub-mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide hotspot anqp-domain-name-profile | 93