Reference Guide

94 | hotspot anqp-ip-addr-avail-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
hotspot anqp-ip-addr-avail-profile
hotspot anqp-ip-addr-avail-profile <profile-name>
enable
ipv4-addr-avail
ipv6-addr-avail
no…
Description
This command defines the available IP address types to be sent in an Access network Query Protocol (ANQP)
information element in a Generic Advertisement Service (GAS) query response.
Syntax
Parameter Description
hotspot anqp-ip-addr-avail-profile
<profile-name>
Creates an ANQP IP Address availability profile.
enable
Enables the IP address availability profile.
ipv4-addr-avail
Indicates the availability of an IPv4 network.
ipv6-addr-avail
Indicates the availability of an IPv6 network.
no…
Removes the existing configuration.
Usage Guidelines
Use this command to configure the IP Address availability information and IP address types which could be
allocated to the clients after they associate to the hotspot W-IAP.
Example
The following command configures an AP using this profile to advertise a public IPv4 network.
(Instant AP)(config)# hotspot anqp-ip-addr-avail-profile default
(Instant AP)(IP-addr-avail "default")# ipv4-addr-avail
(Instant AP)(IP-addr-avail "default")# ipv6-addr-avail
(Instant AP)(IP-addr-avail "default")# enable
(Instant AP)(IP-addr-avail "default")# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode and the ANQP IP address availability profile
configuration sub-mode