Reference Guide

98 | hotspot anqp-nwk-auth-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
hotspot anqp-nwk-auth-profile
hotspot anqp-nwk-auth-profile <profile-name>
enable
nwk-auth-type <auth-type>
url <url>
no…
Description
This command configures an ANQP network authentication profile to define authentication type being used by the
hotspot network.
Syntax
Parameter Description Range
hotspot anqp-nwk-auth-profile
<profile-name>
Configures an ANQP network authentication
profile.
—
enable
Enables the network authentication profile. —
nwk-auth-type
Defines the network Authentication type being
used by the hotspot network.
—
<auth-type>
Allows you to specify any of the following values:
l accept-term-and-cond—When configured, the
network requires the user to accept terms and
conditions.
NOTE: This option requires you to specify a
redirection URL string as an IP address, FQDN
or URL.
l online-enrollment—When configured, the
network supports the online enrollment.
l http-redirect—When configured, additional
information on the network is provided
through HTTP/HTTPS redirection.
l dns-redirect—When configured, additional
information on the network is provided
through DNS redirection.
NOTE: This option requires you to specify a
redirection URL string as an IP address, FQDN
or URL.
accept-term-
and-cond,
online-
enrollment,
http-redirect,
dns-redirect
url
Configures URL, IP address, or FQDN used by
the hotspot network for the accept-term-and-
cond or dns-redirect network authentication
types.
—
no…
Removes any existing configuration.
—
Usage Guidelines
When the asra option is enabled in the hotspot profile associated with a WLANSSID, the settings configured for the
network authentication profile are sent in the GAS response to the client.
Example
The following command configures a network authentication profile for DNS redirection.
(Instant AP)(config)# hotspot anqp-nwk-auth-profile default