Service Manual

ManualsBrandsDell ManualsAccess PlatformsW-IAP3WN/P

Dell Networking W-Series

Instant Access Point

6.2.1.0-3.4

MIB Reference Guide

Summary of content (126 pages)

PAGE 1
MIB Reference Guide Dell Networking W-Series Instant Access Point 6.2.1.0-3.
PAGE 2
Copyright © 2013 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.
PAGE 3
Contents Chapter 1 About this Document ............................................................................ 15 Intended Audience...............................................................................................15 What’s New .........................................................................................................15 Related Documents .............................................................................................15 Frequently Used Acronyms ..................
PAGE 4
aiAPMemoryFree ....................................................................................34 aiAPUptime.............................................................................................34 aiAPTotalMemory ...................................................................................34 aiAPStatus ..............................................................................................34 aiRadioTable .................................................................................
PAGE 5
System MIB .........................................................................................................47 sysDescr ......................................................................................................47 sysObjectID ..................................................................................................48 sysUpTime ...................................................................................................48 sysName ..............................................
PAGE 6
wlsxTrapTargetAPChannel............................................................................67 wlsxTrapNodeMac ........................................................................................67 wlsxTrapSourceMac .....................................................................................67 wlsxReceiverMac ..........................................................................................68 wlsxTrapTransmitterMac..................................................................
PAGE 7
wlsxTrapCTSTransferType............................................................................77 wlsxTrapConfigurationState..........................................................................77 wlsxTrapUpdateFailureReason .....................................................................77 wlsxTrapUpdateFailedObj.............................................................................77 wlsxTrapTableEntryChangeType ..................................................................
PAGE 8
wlsxNAccessPointIsUp .................................................................................96 wlsxNChannelChanged.................................................................................96 wlsxNStationAddedToBlackList....................................................................96 wlsxNStationRemovedFromBlackList...........................................................96 wlsxNRadioAttributesChanged.....................................................................
PAGE 9
wlsxAdhocNetworkBridgeDetected............................................................108 wlsxInterferingApDetected..........................................................................108 wlsxColdStart..............................................................................................108 wlsxWarmStart ............................................................................................108 wlsxAPImpersonation ..........................................................................
PAGE 10
wlsxUserEntryAttributesChanged ...............................................................124 wlsxNAPMasterStatusChange ....................................................................124 wlsxNAdhocUsingValidSSID.......................................................................124 wlsxMgmtUserAuthenticationFailed ...........................................................124 SNMP Traps ......................................................................................................
PAGE 11
Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 High-Level MIB Hierarchy....................................................................................19 Running the snmpget Command ........................................................................24 Graphical User Interface......................................................................................24 Dell W-Instant MIB Hierarchy ..............................................................................29 Trap Hierarchy .....
PAGE 12
| Figures Dell Networking W-Series Instant Access Point 6.2.1.0-3.
PAGE 13
Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 New Features in Dell W-Instant 6.2.1.0-3.4.........................................................15 Frequently Used Acronyms .................................................................................15 Contact Information.............................................................................................18 MIB Node Identification - Enterprise Nodes....................................
PAGE 14
| Tables Dell Networking W-Series Instant Access Point 6.2.1.0-3.
PAGE 15
Chapter 1 About this Document This guide provides information on Management Information Base (MIBs) supported in Dell W-Instant 6.2.1.0-3.4 software release. Intended Audience This manual is intended for network administrators and operators responsible for managing Dell Networking W-Series Instant Access Points (W-IAPs). What’s New The version of the document contains the following updates: Table 1 New Features in Dell W-Instant 6.2.1.0-3.
PAGE 16
Table 2 Frequently Used Acronyms (Continued) Acronym Definition CA Certificate Authority CAC Call Admission Control CHAP Challenge Handshake Authentication Protocol CLI Command Line Interface CRL Certificate Revocation List CSA Channel Switch Announcement CSR Certificate Signing Request CW Contention Window DA Destination Address DES Data Encryption Standard DHCP Dynamic Host Configuration Protocol DNS Domain Name Service DOS Denial of Service DPD Dead Peer Detection DSS Direc
PAGE 17
Table 2 Frequently Used Acronyms (Continued) Acronym Definition MAC Media Access Control MB Megabyte MCHAP Microsoft Challenge Handshake Authentication Protocol MIB Management Information Base NAS Network Address Server NAT Network Address Translation NIC Network Interface Card NTP Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing OID Object Identifier OUI Organizational Unit Identifier PAP Password Authentication Protocol PEAP Protected EAP PEF Policy Enforc
PAGE 18
Table 2 Frequently Used Acronyms (Continued) Acronym Definition VPN Virtual Private Network VRRP Virtual Router Redundancy Protocol VSA Vendor Specific Attributes WEP Wired Equivalent Protocol WINS Windows Internet Naming Service WLAN Wireless Local Area Network WMM Wireless MultiMedia / Wi-Fi Multimedia WMS WLAN Management System WPA Wi-Fi Protected Access Contacting Support Table 3 Contact Information Web Site Support Main Website dell.com Support Website dell.
PAGE 19
Chapter 2 MIBs Overview This chapter provides information about Management Information Base (MIBs) supported in Dell W-Instant 6.2.1.0-3.4 software release. MIBs A MIB is a virtual database that contains information used for network management. Each managed device contains MIBs that define its properties. A separate MIB is provided for each defined property, such as the group of physical ports assigned to a VLAN or the statistical data of packets transferred at a specific rate.
PAGE 20
The hardware MIBs are assigned under the Dell organization code, while all others are under the Aruba organization code. Table 4 indicates the numerical string that lists the nodes of the enterprise MIB hierarchy. The hardware MIBs are assigned under the Dell organization code, while all others are under the Aruba organization code. Table 4 MIB Node Identification - Enterprise Nodes Integer String Name 1 1 OSI 3 1.3 ORG 6 1.3.6 DOD 1 1.3.6.1 Internet 4 1.3.6.1.4 Private 1 1.3.6.1.4.
PAGE 21
 The OID of the MIB object Table 5 MIB Keywords Keyword Description Sequence Refers to the sequence of objects of the MIB. This keyword is used with entry MIB objects to list the MIB objects that exchange information. Syntax Textual conventions, for example, Integer32.
PAGE 22
| MIBs Overview Dell Networking W-Series Instant Access Point 6.2.1.0-3.
PAGE 23
Chapter 3 Using MIBs This chapter provides information on using MIBs.  Downloading MIB Files  Reporting WLAN Health  Reading MIB Files  SNMP File  HP OpenView Downloading MIB Files The latest Aruba MIB files are available for registered customers at: dell.com/support For assistance to set up an account and access files, contact customer service. See “Contacting Support” on page 18.
PAGE 24
NOTE You do not have to set the SNMP community string and security parameters on each W-IAP as this configuration is common to all W-IAPs and is inherited from virtual controller. MIB Browsers If you are using an application that is run through the Linux shell, the command would be as follows: snmpget -v 2c -c Figure 2 shows an example of submitting a command to obtain information.
PAGE 25
Reading MIB Files This section describes how to interpret the basic components of a MIB file. To determine the OIDs, view the file snmp.h. For more information, see “SNMP File” on page 27. MIB files describe a specific component of a network device. The files are numerical strings that are converted to ASCII text by the compiler of the SNMP manager. A word processor or text editor can be used to open the ASCII file. The contents of an example ArubaOS enterprise MIB file, aruba-cts.my, are as follows.
PAGE 26
aiVirtualControllerKey OBJECT-TYPE, the OID is 1.3.6.1.4.1.14823.2.3.3.1.1.1.0. All MIBs and their related OIDs are listed in the snmp file of ArubaOS. For more information, see “SNMP File” on page 27. aiEnterpriseMibModules FROM ARUBA-MIB; Identity Identity is the opening description of the MIB. The information includes contact information for the vendor and a general description of the MIB.
PAGE 27
::= { aiStateGroup 1 } Entry aiAccessPointEntry OBJECT-TYPE SYNTAX AiAccessPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aiAPMACAddress } ::= { aiAccessPointTable 1 } AiAccessPointEntry ::= SEQUENCE { aiAPMACAddress MacAddress, aiAPName DisplayString, aiAPIPAddress IpAddress, aiAPSerialNum DisplayString, aiAPModel OBJECT IDENTIFIER, aiAPModelName DisplayString, aiAPCPUUtilization Integer32, aiAPMemoryFree Integer32, aiAPUptime TimeTicks Closing Line Following is the closing l
PAGE 28
HP OpenView To install the Aruba module for HP OpenView, log in as the root user and execute the following script: # $OV_CONTRIB/NNM/Aruba/install 28 | Using MIBs Dell Networking W-Series Instant Access Point 6.2.1.0-3.
PAGE 29
Chapter 4 Dell W-Instant MIBs The chapter provides information about the Dell W-Instant MIB objects. Figure 4 shows the architecture of the Dell W-Instant MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Dell W-Instant MIB is listed in the file aruba-Instant.my. For information about downloading Dell WInstant MIB file, see “Downloading MIB Files” on page 23. Figure 4 Dell W-Instant MIB Hierarchy Dell Networking W-Series Instant Access Point 6.2.1.0-3.
PAGE 30
The Dell W-Instant MIB tree consists of the following MIB groups and tables. Table 6 Supported Dell W-Instant MIBs and MIB Tables Group Description aiInfoGroup Contains details of the virtual controller. For more information, see “aiInfoGroup” on page 30. aiStateGroup Contains information about status of the Access Point, Radio, WLAN, and Clients connected to a W-IAP.
PAGE 31
Max-Access Read-only Status Current Description Name of the Virtual Controller aiVirtualControllerOrganization Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.3 Syntax DisplayString Max-Access Read-only Status Current Description Virtual Controller organization aiVirtualControllerVersion Object ID 1.3.6.1.4.1.14823.2.3.3.1.1.4 Syntax DisplayString Max-Access Read-only Status Current Description Software version of the controller aiVirtualControllerIPAddress Object ID 1.3.6.1.4.1.14823.2.3.
PAGE 32
aiStateGroup The aiStateGroup contains the following tables:  aiAccessPointTable  aiRadioTable  aiWlanTable  aiClientTable aiAccessPointTable The objects of the aiAccessPointTable provide information about all the W-IAPs connected to the virtual controller. Table 7 aiAccessPointTable OIDs Object Object ID Entry OID aiAccessPointEntry 1.3.6.1.4.1.14823.2.3.3.1.2.1.1 aiAccessPointTable 1 aiAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.1.1.1 aiAccessPointEntry 1 aiAPName 1.3.6.1.4.1.14823.2.3.
PAGE 33
aiAPMACAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description MAC address of the Access Point. aiAPName Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Name of the Access Point. aiAPIPAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the Access Point. aiAPSerialNum Syntax DisplayString (SIZE(0..
PAGE 34
Max-Access read-only Status current Description Model name of the Access Point. aiAPCPUUtilization Syntax Integer32 Max-Access read-only Status current Description CPU utilization of the Access Point. aiAPMemoryFree Syntax Integer32 Max-Access read-only Status current Description Amount of memory free in the access point in bytes. aiAPUptime Syntax TimeTicks Max-Access read-only Status current Description Uptime of the Access Point.
PAGE 35
Description Indicates the Access Point Status. aiRadioTable The objects of the aiRadioTable provide information about all the radios and the related information of the Access Points. Table 8 aiRadioTable OIDs Object Object ID Entry OID aiRadioEntry 1.3.6.1.4.1.14823.2.3.3.1.2.2.1 aiRadioTable 1 aiRadioAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.1 aiRadioEntry 1 aiRadioIndex 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.2 aiRadioEntry 2 aiRadioMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.
PAGE 36
aiRadioEntry Syntax aiRadioEntry Max-Access not-accessible Status current Description NA Index aiRadioAPMACAddress, aiRadioIndex aiRadioAPMacAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description MAC Address of the Access Point where this radio is active. aiRadioIndex Syntax Integer32 Max-Access read-only Status current Description Radio number of the Access Point.
PAGE 37
aiRadioTransmitPower Syntax Integer32 Max-Access read-only Status current Description Radio transmission power of the Access Point. aiRadioNoiseFloor Syntax Integer32 Max-Access read-only Status current Description Radio noise of the Access Point in dBm. aiRadioUtilization4 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 4 second average.
PAGE 38
Max-Access read-only Status current Description Total number of management frames transmitted. aiRadioTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of data frames transmitted. aiRadioTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted. aiRadioTxDrops Syntax Counter32 Max-Access read-only Status current Description Total number of frames dropped during transmission.
PAGE 39
Description Total number of received data frames. aiRadioRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes. aiRadioRxMgmtFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received management frames. aiRadioRxBad Syntax Counter32 Max-Access read-only Status current Description Total number of frames received in error.
PAGE 40
aiWlanTable The objects of the aiWlanTable provide information about all the BSSIDs active on the virtual controller. Table 9 aiWlanTable OIDs Object Object ID Entry OID aiWlanEntry 1.3.6.1.4.1.14823.2.3.3.1.2.3.1 aiWlanTable 1 aiWlanAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.1 aiWlanEntry 1 aiWlanIndex 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.2 aiWlanEntry 2 aiWlanESSID 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.3 aiWlanEntry 3 aiWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.
PAGE 41
Status current Description Index of the WLAN. This is a unique index assigned to the active WLAN on the Access Point. aiWlanESSID Syntax DisplayString Max-Access read-only Status current Description ESSID of the WLAN aiWlanMACAddress Syntax MacAddress (OCTET STRING). Hint: 1x: Max-Access read-only Status current Description BSSID of the WLAN aiWlanTxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted.
PAGE 42
aiWlanRxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received frames. aiWlanRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received data frames. aiWlanRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes. aiClientTable The objects of the aiWlanTable provide information about all the clients connected to the virtual controller.
PAGE 43
Table 10 aiClientTable OID Object Object ID Entry OID aiClientTxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.10 aiClientEntry 10 aiClientTxRate 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.11 aiClientEntry 11 aiClientRxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.12 aiClientEntry 12 aiClientRxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.13 aiClientEntry 13 aiClientRxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.14 aiClientEntry 14 aiClientRxRate 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.15 aiClientEntry 15 aiClientUptime 1.
PAGE 44
Status current Description IP address of the client. aiClientAPIPAddress Syntax IpAddress Max-Access read-only Status current Description Radio channel. First byte contains primary channel and first two bits on second byte contains indicator for secondary channel. If first two bits of second byte is 0, it is a 20MHz channel. If first two bits of second byte is 01, secondary channel is above primary channel, if first two bits of second by is 10, secondary channel is below the primary channel.
PAGE 45
Description Total number of frames transmitted by the client. aiClientTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of bytes transmitted by the client. aiClientTxRetries Syntax Counter32 Max-Access read-only Status current Description Total number of retry frames transmitted by the client. aiClientTxRate Syntax Integer32 Max-Access read-only Status current Description Transmission rate of the client in mbps.
PAGE 46
aiClientRxRetries Syntax Counter32 Max-Access read-only Status current Description Total number of retry frames received by the client. aiClientRxRate Syntax Integer32 Max-Access read-only Status current Description Receiving rate of the client in mbps. aiClientUptime Syntax TimeTicks Max-Access read-only Status current Description Client uptime. On mobility event all counters are reset to 0 and uptime resets to 0.
PAGE 47
Chapter 5 Standard SNMP MIBs This section provides information on the following standard MIBs modules and tables supported in this release of Dell W-Instant.  System MIB  dot1qTpFdbTable  ifTable  ifXTable System MIB The system MIB contains system-specific information about the W-IAP. Dell W-Instant supports the following system MIB objects:  sysDescr— Provides information on the W-IAP model and software version of the W-IAP.  sysObjectID—Identifies the network management subsystem.
PAGE 48
Description A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contains printable ASCII characters. sysObjectID Object ID 1.3.6.1.2.1.1.2 Syntax Object Identifier Max-Access read-only Status mandatory Description The vendor's authoritative identification of the network management subsystem contained in the entity.
PAGE 49
Description The physical location of the AP. sysServices Object ID 1.3.6.1.2.1.1.7 Syntax Integer Max-Access read-only Status mandatory Description A value which indicates the set of services that the AP primarily offers. dot1qTpFdbTable This table contains information about the associated station MAC addresses, the corresponding port from the interface table, and status.
PAGE 50
dot1qTpFdbPort Object ID 1.3.6.1.2.1.17.7.1.2.2.1.2 Syntax Integer32 (0..65535) Max-Access read-only Status current Description Port number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress. The index value of ifTable is set as the port number field in this table. If the self MAC address is used, the index is 0. dot1qTpFdbStatus Object ID 1.3.6.1.2.1.17.7.1.2.2.1.
PAGE 51
 ifInDiscards  ifInErrors The following ifTable objects are not supported:  ifOutQLen  ifSpecific  ifInUnknownProtos  ifLastChange ifIndex Object ID 1.3.6.1.2.1.2.2.1.1 Syntax Integer32 Max-Access read-only Status current Description Value assigned to an interface.  Ethernet interface value range: 1—49  Radio 0 interface value range: 50—69.  Radio 1 interface range: 70—89.
PAGE 52
ifMtu Object ID 1.3.6.1.2.1.2.2.1.4 Syntax Integer32 Max-Access read-only Status current Description The size of the largest packet which can be sent or received on interface. ifSpeed Object ID 1.3.6.1.2.1.2.2.1.5 Syntax Gauge32 Max-Access read-only Status current Description The current bandwidth of the interface in bits per second. ifPhysAddress Object ID 1.3.6.1.2.1.2.2.1.
PAGE 53
Max-Access read-only Status current Description Operational status of the interface. ifInOctets Object ID 1.3.6.1.2.1.2.2.1.10 Syntax Counter32 Max-Access read-only Status current Description Number of octets received on the interface. ifInUcastPkts Object ID 1.3.6.1.2.1.2.2.1.
PAGE 54
Description The number of inbound packets discarded. ifInErrors Object ID 1.3.6.1.2.1.2.2.1.14 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmission units with errors. ifOutOctets Object ID 1.3.6.1.2.1.2.2.1.16 Syntax Counter32 Max-Access read-only Status current Description The total number of octets transmitted out of the interface. ifOutUcastPkts Object ID 1.3.6.1.2.1.2.2.1.
PAGE 55
ifOutErrors Object ID 1.3.6.1.2.1.2.2.1.20 Syntax Counter32 Max-Access read-only Status current Description The number of outbound packets that could not be transmitted because of errors. ifXTable The ifXTable table contains the following additional objects for the interface table.
PAGE 56
ifInMulticastPkts Object ID 1.3.6.1.2.1.31.1.1.1.2 Syntax Counter32 Max-Access read-only Status current Description The number of packets, delivered by this sub-layer to a higher layer, which were addressed to a multicast or broadcast address at this sub-layer. ifInBroadcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
PAGE 57
ifHCInOctets Object ID 1.3.6.1.2.1.31.1.1.1.6 Syntax Counter64 Max-Access read-only Status current Description The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. ifHCInUcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
PAGE 58
ifHCOutOctets Object ID 1.3.6.1.2.1.31.1.1.1.10 Syntax Counter64 Max-Access read-only Status current Description The total number of octets transmitted out of the interface, including framing characters. ifHCOutUcastPkts Object ID 1.3.6.1.2.1.31.1.1.1.
PAGE 59
ifLinkUpDownTrapEnable Object ID 1.3.6.1.2.1.31.1.1.1.14 Syntax Integer Max-Access read-write Status current Description Indicates whether linkUp or linkDown traps must be generated for this interface. ifPromiscuousMode Object ID 1.3.6.1.2.1.31.1.1.1.16 Syntax Integer Max-Access TruthValue Status current Description This object has true (1) and false(2) values. ifConnectorPresent Object ID 1.3.6.1.2.1.31.1.1.1.
PAGE 60
| Standard SNMP MIBs Dell Networking W-Series Instant Access Point 6.2.1.0-3.
PAGE 61
Chapter 6 Traps This module defines the traps that can be generated by the W-IAP. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). Varbinds are defined in the Description section below. Figure 5 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Traps are listed in the file aruba-trap.
PAGE 62
ai Traps Objects Group The following table lists the supported trap objects in this group: Table 11 aiTraps Objects Group OIDs 62 | Traps Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.1 wlsxTrapObjectsGroup 1 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.2 wlsxTrapObjectsGroup 2 wlsxTrapAPBSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.3 wlsxTrapObjectsGroup 3 wlsxTrapEssid 1.3.6.1.4.1.14823.2.3.3.1.200.1.4 wlsxTrapObjectsGroup 4 wlsxTrapTargetAPBSSID 1.3.6.1.4.1.14823.
PAGE 63
Table 11 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapAuthServerTimeout 1.3.6.1.4.1.14823.2.3.3.1.200.1.27 wlsxTrapObjectsGroup 27 wlsxTrapCardSlot 1.3.6.1.4.1.14823.2.3.3.1.200.1.28 wlsxTrapObjectsGroup 28 wlsxTrapTemperatureValue 1.3.6.1.4.1.14823.2.3.3.1.200.1.29 wlsxTrapObjectsGroup 29 wlsxTrapProcessName 1.3.6.1.4.1.14823.2.3.3.1.200.1.30 wlsxTrapObjectsGroup 30 wlsxTrapFanNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.31 wlsxTrapObjectsGroup 31 wlsxTrapVoltageType 1.3.6.1.
PAGE 64
Table 11 aiTraps Objects Group OIDs (Continued) 64 | Traps Object Object ID wlsxTrapUserAuthenticationMethod 1.3.6.1.4.1.14823.2.3.3.1.200.1.55 wlsxTrapObjectsGroup 55 wlsxTrapAPRadioNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.56 wlsxTrapObjectsGroup 56 wlsxTrapRogueInfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.57 wlsxTrapObjectsGroup 57 wlsxTrapInterferingAPInfoURL 1.3.6.1.4.1.14823.2.3.3.1.200.1.58 wlsxTrapObjectsGroup 58 wlsxTrapPortNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 65
Table 11 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapLocaIIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.83 wlsxTrapObjectsGroup 83 wlsxTrapMasterName 1.3.6.1.4.1.14823.2.3.3.1.200.1.84 wlsxTrapObjectsGroup 84 wlsxTrapLocalName 1.3.6.1.4.1.14823.2.3.3.1.200.1.85 wlsxTrapObjectsGroup 85 wlsxTrapPrimaryControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.86 wlsxTrapObjectsGroup 86 wlsxTrapBackupControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 66
Table 11 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapAPActiveUplinkType 1.3.6.1.4.1.14823.2.3.3.1.200.1.132 wlsxTrapObjectsGroup 132 wlsxTrapAPUplinkChangeReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.133 wlsxTrapObjectsGroup 133 wlsxTrapAPManagedModeConfigFailure 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 67
wlsxTrapTargetAPBSSID Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. wlsxTrapTargetAPSSID Syntax DisplayString(Size(0..
PAGE 68
wlsxReceiverMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the receiver. wlsxTrapTransmitterMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the transmitter.
PAGE 69
wlsxTrapAddressType Syntax ArubaAddressType Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the address type. wlsxTrapAPLocation Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the location of the AP.
PAGE 70
wlsxTrapRogueIfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBUI Rogue AP information URL. wlsxTrapVLANId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the VLAN ID.
PAGE 71
wlsxTrapCardSlot Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the slot in which this card is present. wlsxTrapTemperatureValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the temperature value. wlsxTrapProcessName Syntax DisplayString(Size(0..
PAGE 72
wlsxTrapStationBlackListReason Syntax ArubaBlackListReason Max-Access accessible-for-notify Status current Description The reason for which a station is black listed. wlsxTrapSpoofedIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in a trap to identify a spoofed IP address.
PAGE 73
wlsxTrapDBIpAddress Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the IP address of the database. wlsxTrapDBType Syntax ArubaDBType Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the port of the user. wlsxTrapVrrpID Syntax Integer32 Max-Access accessible-for-notify Status current Description This object contains the virtual router identifier.
PAGE 74
wlsxTrapESIServerName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server name. wlsxTrapESIServerIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server IP address.
PAGE 75
wlsxTrapUserPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of the user. wlsxTrapUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the user name. wlsxTrapUserRole Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Authentication method of the user.
PAGE 76
wlsxTrapInterferingAPInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue interfering access point information URL. wlsxTrapPortNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the port number.
PAGE 77
wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the transfer type, upload or download.
PAGE 78
wlsxTrapGlobalConfigObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object corresponding to the global configuration change. wlsxTrapTableGenNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the generation number of a table. Used in the MMS to keep track of the table content changes.
PAGE 79
wlsxVoiceCurrentNumCdr Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of CDRs in buffer. History Added in ArubaOS 3.1.0.0. wlsxTrapTunnelId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel ID. wlsxTrapTunnelStatus Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel status.
PAGE 80
wlsxTraptimeStr Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Time in String format. wlsxTrapMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the master IP address. wlsxTrapLocaIIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the local IP address. wlsxTrapMasterName Syntax DisplayString(Size(0..
PAGE 81
wlsxTrapBackupControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's backup controller. wlsxTrapSpoofedFrameType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Spoofed Frame Type wlsxTrapAssociationType Syntax DisplayString (SIZE(0..
PAGE 82
wlsxTrapVcMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a Voice client. wlsxTrapAPName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Name of the AP. wlsxTrapApMode Syntax Integer32 Max-Access accessible-for-notify Status current Description This Object represents the AP Mode.
PAGE 83
wlsxTrapAPCurMode Syntax ArubaAccessPointMode (INTEGER) Max-Access accessible-for-notify Status current Description This Object represents the APs Current Mode. wlsxTrapAPPrevMode Syntax ArubaAccessPointMode (INTEGER) Max-Access accessible-for-notify Status current Description This Object represents the APs Previous Mode.
PAGE 84
wlsxTrapApMasterStatus Syntax ArubaAPMasterStatus (INTEGER) Max-Access accessible-for-notify Status current Description Status of the AP as seen by the master when the status changes. wlsxTrapCaName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the name of the trustpoint. wlsxTrapCrlName Syntax DisplayString (SIZE(0..
PAGE 85
wlsxTrapAPPreviousUplinkType Syntax ArubaAPUplinkType Max-Access accessible-for-notify Status current Description This object represents the previous uplink type of an AP. wlsxTrapAPPreviousUplinkActiveTime Syntax TimeTicks Max-Access accessible-for-notify Status current Description This object represents the active time of the previous uplink of an AP.
PAGE 86
ai Traps Definitions Group Table 12 ai Traps Definitions Group OIDs 86 | Traps Object Object ID wlsxNUserEntryCreated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1014 wlsxTrapDefinitionsGroup 1014 wlsxNUserEntryDeleted 1.3.6.1.4.1.14823.2.3.3.1.200.2.1015 wlsxTrapDefinitionsGroup 1015 wlsxNUserEntryAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1016 wlsxTrapDefinitionsGroup 1016 wlsxNUserEntryDeAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 87
Table 12 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxValidSSIDViolation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1057 wlsxTrapDefinitionsGroup 1057 wlsxChannelMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1058 wlsxTrapDefinitionsGroup 1058 wlsxOUIMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1059 wlsxTrapDefinitionsGroup 1059 wlsxSSIDMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1060 wlsxTrapDefinitionsGroup 1060 wlsxShortPreableMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.
PAGE 88
Table 12 ai Traps Definitions Group OIDs (Continued) 88 | Traps Object Object ID wlsxFrameReceiveErrorRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1075 wlsxTrapDefinitionsGroup 1075 wlsxFrameFragmentationRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1076 wlsxTrapDefinitionsGroup 1076 wlsxFrameBandWidthRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1077 wlsxTrapDefinitionsGroup 1077 wlsxFrameLowSpeedRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 89
Table 12 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxSequenceNumberAnomalyAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1092 wlsxTrapDefinitionsGroup 1092 wlsxSequenceNumberAnomalySta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1093 wlsxTrapDefinitionsGroup 1093 wlsxDisconnectStationAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1094 wlsxTrapDefinitionsGroup 1094 wlsxApFloodAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1095 wlsxTrapDefinitionsGroup 1095 wlsxAdhocNetwork 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 90
Table 12 ai Traps Definitions Group OIDs (Continued) 90 | Traps Object Object ID wlsxNAuthServerIsDown 1.3.6.1.4.1.14823.2.3.3.1.200.2.1115 wlsxTrapDefinitionsGroup 1115 wlsxWindowsBridgeDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1129 wlsxTrapDefinitionsGroup 1129 wlsxSignAPNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1134 wlsxTrapDefinitionsGroup 1134 wlsxSignStaNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1135 wlsxTrapDefinitionsGroup 1135 wlsxSignAPAsleap 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 91
Table 12 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxSuspectUnsecureAPDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1150 wlsxTrapDefinitionsGroup 1150 wlsxSuspectUnsecureAPResolved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1151 wlsxTrapDefinitionsGroup 1151 wlsxHtGreenfieldSupported 1.3.6.1.4.1.14823.2.3.3.1.200.2.1157 wlsxTrapDefinitionsGroup 1157 wlsxHT40MHzIntoleranceAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1158 wlsxTrapDefinitionsGroup 1158 wlsxHT40MHzIntoleranceSta 1.3.6.1.4.1.14823.2.3.
PAGE 92
Table 12 ai Traps Definitions Group OIDs (Continued) 92 | Traps Object Object ID wlsxFataJackAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1180 wlsxTrapDefinitionsGroup 1180 wlsxInvalidAddressCombination 1.3.6.1.4.1.14823.2.3.3.1.200.2.1181 wlsxTrapDefinitionsGroup 1181 wlsxValidClientMisassociation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1182 wlsxTrapDefinitionsGroup 1182 wlsxMalformedHTIEDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1183 wlsxTrapDefinitionsGroup 1183 wlsxMalformedAssocReqDetected 1.3.6.1.4.
PAGE 93
Table 12 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxBlockAckAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1198 wlsxTrapDefinitionsGroup 1198 wlsxHotspotterAttackDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1199 wlsxTrapDefinitionsGroup 1199 wlsxNSignatureMatch 1.3.6.1.4.1.14823.2.3.3.1.200.2.1200 wlsxTrapDefinitionsGroup 1200 wlsxNSignatureMatchNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1201 wlsxTrapDefinitionsGroup 1201 wlsxNSignatureMatchAsleap 1.3.6.1.4.1.14823.2.3.3.1.
PAGE 94
Table 12 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxAPPowerChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1217 wlsxTrapDefinitionsGroup 1217 wlsxAPModeChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.1218 wlsxTrapDefinitionsGroup 1218 wlsxUserEntryAttributesChanged 1.3.6.1.4.1.14823.2.3.3.1.200.2.1219 wlsxTrapDefinitionsGroup 1219 wlsxPowerSaveDosAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1220 wlsxTrapDefinitionsGroup 1220 wlsxNAPMasterStatusChange 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 95
wlsxNUserEntryDeleted Objects wlsxTrapTime, wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress Status current Description This trap indicates that a user was deleted. wlsxNUserEntryAuthenticated Objects wlsxTrapTime, wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress, wlsxTrapUserName, wlsxTrapUserAuthenticatio Method, wlsxTrapUserRole Status current Description This trap indicates that a user is Authenticated.
PAGE 96
wlsxNAccessPointIsUp Objects wlsxTrapTime, wlsxTrapAPMacAddress Status current Description A Trap which indicates that an access point up. wlsxNAccessPointIsDown Objects wlsxTrapTime, wlsxTrapAPMacAddress Status current Description A Trap which indicates that an access point down.
PAGE 97
wlsxUnsecureAPDetected Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel, wlsxTrapMatchedMac, wlsxTrapMatchedIp, wlsxTrapRogueInfoURL} Status current Description This trap indicates that an unauthorized access point is connected to the wired network. The access point is declared Rogue because it was matched to a MAC address.
PAGE 98
wlsxChannelMisconfiguration Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected an access point that has a channel misconfiguration because it is using a channel that is not valid.
PAGE 99
wlsxAdhocNetworkDetected Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected an adhoc network.
PAGE 100
wlsxChannelInterferenceDetected Objects {wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation,wlsxTrapAPChannel} Status current Description This trap indicates that an AP has detected channel interference. wlsxChannelInterferenceCleared Objects {wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that a previously detected channel interference is no longer present.
PAGE 101
wlsxFrameRetryRateExceeded Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected that an access point has exceeded the configured upper threshold for Frame Retry Rate.
PAGE 102
wlsxFrameNonUnicastRateExceeded Objects { wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that an AP detected that station has exceeded the configured upper threshold for Non Unicast traffic rate.
PAGE 103
wlsxSignatureMatchAP Objects {wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that an AP detected a signature match in a frame from an access point.
PAGE 104
wlsxNodeRateAnomalyAP Objects {wlsxTrapTime, wlsxTrapFrameType, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that an AP detected frames transmitted or received by an access point, which exceed the configured IDS rate threshold. For more information check: http://www.wve.org/entries/show/WVE-2005-0052 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.
PAGE 105
wlsxSequenceNumberAnomalyAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AM received packets from an AP which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS configuration object. For more information check: http://www.wve.org/entries/show/WVE-2005-0061 http://www.wve.
PAGE 106
wlsxApFloodAttack Objects { wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that the number of potential fake APs detected by an AP has exceeded the configured IDS threshold. This is the total number of fake APs observed across all bands. For more information check http://www.wve.
PAGE 107
wlsxWEPMisconfiguration Objects {wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel} Status current Description This trap indicates that an AP detected an access point that is misconfigured because it does not have Privacy enabled.
PAGE 108
wlsxAdhocNetworkBridgeDetected Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected an Adhoc network that is bridging to a wired network.
PAGE 109
wlsxWindowsBridgeDetected Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected a station that is bridging from a wireless network to a wired network.
PAGE 110
wlsxSignAPAirjack Objects {wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for AirJack from an access point. For more information check http://www.wve.
PAGE 111
wlsxSignStaDeauthBcast Objects {wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that an AP detected a signature match for Deauth-Broadcast from a Station.For more information check: http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.
PAGE 112
wlsxDisconnectStationAttackAP Objects {wlsxTrapTime, wlsxTrapFrameType, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation} Status current Description This trap indicates that an AM detected a station Disconnect attack. For more information check: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.
PAGE 113
wlsxHT40MHzIntoleranceAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation,wlsxTrapAPChannel } Status current Description This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting. For more information check http://www.wve.
PAGE 114
wlsxClientFloodAttack Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that the number of potential fake clients detected by an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands. For more information check http://www.wve.
PAGE 115
wlsxClientAssociatingOnWrongChannel Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapSpoofedFrameType, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel.
PAGE 116
wlsxTKIPReplayAttack Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a TKIP replay attack. If successful this could be the precursor to more advanced attacks. For more information check http://www.wve.
PAGE 117
wlsxMalformedHTIEDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a malformed HT Information Element. This can be the result of a misbehaving wireless driver or it may be an indication of a new wireless attack.
PAGE 118
wlsxMalformedFrameWrongChannelDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapTargetAPChannel, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a beacon on one channel advertising another channel. This could be an attempt to lure clients away from a valid AP. For more information check http://www.wve.
PAGE 119
wlsxNRogueAPResolved Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel Status current Description This trap indicates that a previously detected access point, classified as Rogue, is either no longer present in the network or it changed its state.
PAGE 120
wlsxBlockAckAttackDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an attempt has been made to deny service to the source address by spoofing a block ACK add request that sets a sequence number window outside the currently used window. For more information check http://www.wve.
PAGE 121
wlsxNSignatureMatchAirjack Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Airjack in a frame. For more information check http://www.wve.
PAGE 122
wlsxNSignatureMatchWellenreiter Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Wellenreiter in a frame. For more information check http://www.wve.
PAGE 123
wlsxAPTaggedWiredContainment Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapNodeMac, wlsxTrapDeviceIpAddress, wlsxTrapDeviceMac, wlsxTrapVlanId, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP has attempted to contain an access point by disrupting traffic to its client on the wired interface.
PAGE 124
wlsxAPModeChange Objects wlsxTrapTime, wlsxTrapAPCurMode, wlsxTrapAPPrevMode, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP changed its mode from AP to AP Monitor or vice versa.
PAGE 125
SNMP Traps SNMP Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). The following traps are supported for the ifTable objects:  linkDown  linkUp These traps are sent when there is change on a specific interface such as GRE or Ethernet. linkDown Object ID 1.3.6.1.6.3.1.1.5.
PAGE 126
| Traps Dell Networking W-Series Instant Access Point 6.2.1.0-3.