Reference Guide

ManualsBrandsDell ManualsAccess PlatformsW-IAP92/93

Dell PowerConnect W-Series

Instant Access Point

6.1.3.1-3.0.0.0

MIB Reference Guide

Summary of content (108 pages)

PAGE 1
Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.
PAGE 2
Copyright © 2012 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners.
PAGE 3
Contents Preface..................................................................................................................................................................... 15 An Overview of This Manual .......................................................................................................... 15 Contents ............................................................................................................................................. 15 Related Documents..................
PAGE 4
aiRadioNoiseFloor .................................................................................................................... 35 aiRadioUtilization4.................................................................................................................... 35 aiRadioUtilization64.................................................................................................................. 35 aiRadioTxTotalFrames ............................................................................
PAGE 5
wlsxTrapNodeMac................................................................................................................... 54 wlsxTrapSourceMac ............................................................................................................... 54 wlsxReceiverMac..................................................................................................................... 55 wlsxTrapTransmitterMac.......................................................................................
PAGE 6
wlsxTrapConfigurationState................................................................................................... 64 wlsxTrapUpdateFailureReason.............................................................................................. 64 wlsxTrapUpdateFailedObj....................................................................................................... 64 wlsxTrapTableEntryChangeType...........................................................................................
PAGE 7
wlsxReservedChannelViolation ............................................................................................. 81 wlsxValidSSIDViolation ........................................................................................................... 81 wlsxChannelMisconfiguration ............................................................................................... 81 wlsxOUIMisconfiguration .....................................................................................................
PAGE 8
wlsxSignAPAsleap ................................................................................................................... 92 wlsxSignStaAsleap .................................................................................................................. 92 wlsxSignAPAirjack................................................................................................................... 92 wlsxSignStaAirjack .....................................................................................
PAGE 9
wlsxAPDeauthContainment.................................................................................................. 103 wlsxClientDeauthContainment............................................................................................. 103 wlsxAPWiredContainment.................................................................................................... 103 wlsxClientWiredContainment...............................................................................................
PAGE 10
| Contents Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 11
Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 High-Level MIB Hierarchy .............................................................................................................. 20 CLI Interface...................................................................................................................................... 23 Graphical User Interface................................................................................................................. 24 Instant MIB Hierarchy ....
PAGE 12
| Figures Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 13
Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Acronyms........................................................................................................................................... 15 MIB Node Identification - Enterprise Nodes ............................................................................... 19 MIB Keywords ...........................................................................................................................
PAGE 14
| Tables Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 15
Preface An Overview of This Manual This manual is for network administrators and operators responsible for managing the Dell PowerConnect W-Series Instant Access Point. Contents This guide provides information about MIBs. Unless otherwise stated in the following table, each chapter provides information about the hierarchy, OIDs, and descriptions of the statistical information the MIBs provide. Chapter Contents MIBs Overview Introductory information about Dell Instant MIBs.
PAGE 16
Table 1 Acronyms (Continued) 16 | Preface Acronym Definition CAC Call Admission Control CHAP Challenge Handshake Authentication Protocol CLI Command Line Interface CRL Certificate Revocation List CSA Channel Switch Announcement CSR Certificate Signing Request CW Contention Window DA Destination Address DES Data Encryption Standard DHCP Dynamic Host Configuration Protocol DNS Domain Name Service DOS Denial of Service DPD Dead Peer Detection DSS Direct Spread Spectrum EAP Exte
PAGE 17
Table 1 Acronyms (Continued) Acronym Definition MB Megabyte MCHAP Microsoft Challenge Handshake Authentication Protocol MIB Management Information Base NAS Network Address Server NAT Network Address Translation NIC Network Interface Card NTP Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing OID Object Identifier OUI Organizational Unit Identifier PAP Password Authentication Protocol PEAP Protected EAP PEF Policy Enforcement Firewall PIN Personal Identificatio
PAGE 18
Table 1 Acronyms (Continued) Acronym Definition VRRP Virtual Router Redundancy Protocol VSA Vendor Specific Attributes WEP Wired Equivalent Protocol WINS Windows Internet Naming Service WLAN Wireless Local Area Network WMM Wireless MultiMedia / Wi-Fi Multimedia WMS WLAN Management System WPA Wi-Fi Protected Access Contacting Support Website Support 18 | Preface Main Website dell.com Support Website support.dell.com Dell Documentation support.dell.
PAGE 19
Chapter 1 MIBs Overview This chapter provides an overview of the Instant Enterprise MIBs in the following sections:  MIBs  SNMP MIBs A Management Information Base (MIB) is a virtual database that contains information that is used for network management. Each managed device contains MIBs that define the properties of that device.
PAGE 20
Figure 1 illustrates the high-level hierarchy of the MIBs. This document only covers the enterprise MIBs, objects designed to specifically support Dell devices. Standard MIBs are not covered. Figure 1 High-Level MIB Hierarchy ISO (1) 1 ORG (3) 1.3 DOD (6) 1.3.6 Internet (1) 1.3.6.1 Directory (1) Management (2) Experimental (4) 1.3.6.1.1 1.3.6.1.2 1.3.6.1.3 Private (4) 1.3.6.1.4 Enterprises (1) 1.3.6.1.4.1 Aruba (14823) 1.3.6.1.4.1.
PAGE 21
 MIBs are used for communication between the Managers and the Agents. The OIDs of the MIBs enable the Managers and Agents to communicate specific data requests and data returns.  To ensure functionality with SNMP, MIB objects must be defined with the proper keywords, as shown in Table 3. Instant Enterprise MIBs support SNMPv1, SNMPv2, and SNMPv3. Table 3 MIB Keywords Keyword Description Sequence The sequence of objects of the MIB.
PAGE 22
| MIBs Overview Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 23
Chapter 2 Using MIBs This chapter provides information on and examples of using MIBs.  Downloading MIB Files  Monitoring WLAN Health  Reading MIB Files  SNMP File  HP OpenView Downloading MIB Files The most recent Dell MIB files are available for registered customers at: support.dell.com. For assistance to set up an account and access files, please contact customer service. See “Contacting Support” on page 18.
PAGE 24
Figure 3 shows how information may be obtained through a graphical user interface (GUI). The user interface and the available features vary by application. Figure 3 Graphical User Interface Reading MIB Files This section describes how to interpret the basic components of a MIB file. To determine the OIDs, viewing the file snmp.h may be necessary, which is described in “SNMP File” on page 27. For additional information about MIB files, see “MIBs” on page 19.
PAGE 25
Imports The Imports section lists the objects that are defined in external ASN.1 files and are used in the current MIB file.
PAGE 26
Identity Identity is the opening description of the MIB. The information includes contact information for the vendor and a general description of the MIB. aiMIB MODULE-DENTITY LAST-UPDATED "0804160206Z" ORGANIZATION "Aruba Wireless Networks" CONTACT-INFO "Postal: 1322 Crossman Avenue Sunnyvale, CA 94089 E-mail: dl-support@arubanetworks.com Phone: +1 408 227 4500" DESCRIPTION "This MIB is for managing Aruba Instant WLAN" REVISION "0804160206Z" DESCRIPTION "The initial revision.
PAGE 27
Entry aiAccessPointEntry OBJECT-TYPE SYNTAX AiAccessPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { aiAPMACAddress } ::= { aiAccessPointTable 1 } AiAccessPointEntry ::= SEQUENCE { aiAPMACAddress MacAddress, aiAPName DisplayString, aiAPIPAddress IpAddress, aiAPSerialNum DisplayString, aiAPModel OBJECT IDENTIFIER, aiAPModelName DisplayString, aiAPCPUUtilization Integer32, aiAPMemoryFree Integer32, aiAPUptime TimeTicks Closing Line Following is the closing line—the end of the MIBs
PAGE 28
| Using MIBs Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 29
Chapter 3 Instant MIB The chapter provides information about the Dell Instant MIB, as well as entities that are attempting to access the network. Figure 4 shows the architecture of the Dell Instant MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.dell). The Instant MIB is listed in the file aruba-instant.my. For information about downloading Dell Instant MIB file, see “Downloading MIB Files” on page 23.
PAGE 30
The supported tables in the Instant MIB are listed and summarized in Table 4. The objects of the supported tables are described in the following sections. The following table lists the supported tables in the Instant MIB: Table 4 Supported Instant MIB Tables Group Description aiAccessPointTable Contains all the access points connected to the virtual controller. This table is indexed by the MAC Address of the IAP.
PAGE 31
aiAPMACAddress Syntax MacAddress Max-Access read-only Status current Description MAC address of the Access Point. aiAPName Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Name of the Access Point. aiAPIPAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the Access Point. aiAPSerialNum Syntax DisplayString (SIZE(0..64)) Max-Access read-only Status current Description Serial number of the Access Point.
PAGE 32
aiAPModelName Syntax DisplayString (SIZE(0..32)) Max-Access read-only Status current Description Model name of the Access Point. aiAPCPUUtilization Syntax Integer32 Max-Access read-only Status current Description CPU utilization of the Access Point. aiAPMemoryFree Syntax Integer32 Max-Access read-only Status current Description Amount of memory free in the access point in bytes.
PAGE 33
aiRadioTable The objects of the aiRadioTable provide information about all the radios and the related information of the Access Points. Table 6 aiRadioTable OIDs Object Object ID aiRadioEntry 1.3.6.1.4.1.14823.2.3.3.1.2.2.1 aiRadioTable 1 aiRadioAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.1 aiRadioEntry 1 aiRadioIndex 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.2 aiRadioEntry 2 aiRadioMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.3 aiRadioEntry 3 aiRadioChannel 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.
PAGE 34
aiRadioAPMacAddress Syntax MacAddress Max-Access read-only Status current Description MAC Address of the Access Point where this radio is active. aiRadioIndex Syntax Integer32 Max-Access read-only Status current Description Radio number of the Access Point. aiRadioMACAddress Syntax MacAddress Max-Access read-only Status current Description Radio MAC address of the Access Point.
PAGE 35
aiRadioNoiseFloor Syntax Integer32 Max-Access read-only Status current Description Radio noise of the Access Point in dBm. aiRadioUtilization4 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 4 second average. aiRadioUtilization64 Syntax Integer32 Max-Access read-only Status current Description Radio channel utilization 64 second average.
PAGE 36
aiRadioTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of data frames transmitted. aiRadioTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted. aiRadioTxDrops Syntax Counter32 Max-Access read-only Status current Description Total number of frames dropped during transmission.
PAGE 37
aiRadioRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of received data bytes. aiRadioRxMgmtFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received management frames. aiRadioRxBad Syntax Counter32 Max-Access read-only Status current Description Total number of frames received in error.
PAGE 38
aiWlanTable The objects of the aiWlanTable provide information about all the BSSIDs active on the virtual controller. Table 7 aiWlanTable OIDs Object Object ID aiWlanEntry 1.3.6.1.4.1.14823.2.3.3.1.2.3.1 aiWlanTable 1 aiWlanAPMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.1 aiWlanEntry 1 aiWlanIndex 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.2 aiWlanEntry 2 aiWlanESSID 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.3 aiWlanEntry 3 aiWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.3.1.4 aiWlanEntry 4 aiWlanTxTotalFrames 1.
PAGE 39
aiWlanIndex Syntax Integer32 Max-Access read-only Status current Description Index of the WLAN. This is a unique index assigned to the active WLAN on the Access Point.
PAGE 40
aiWlanTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of data bytes transmitted. aiWlanRxTotalFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received frames. aiWlanRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of received data frames.
PAGE 41
aiClientTable The objects of the aiWlanTable provide information about all the clients connected to the virtual controller. Table 8 aiClientTable OID Object Object ID aiClientTable Entry 1.3.6.1.4.1.14823.2.3.3.1.2.4.1 aiClientTable 1 aiClientMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.1 aiClientEntry 1 aiClientWlanMACAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.2 aiClientEntry 2 aiClientIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.3 aiClientEntry 3 aiClientAPIPAddress 1.3.6.1.4.1.14823.2.3.3.1.2.4.
PAGE 42
aiClientWlanMACAddress Syntax MacAddress Max-Access read-only Status current Description BSSID of WLAN where client is associated. aiClientIPAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the client. aiClientAPIPAddress Syntax IpAddress Max-Access read-only Status current Description IP Address of the associated Access Point.
PAGE 43
aiClientSNR Syntax Integer32 Max-Access read-only Status current Description Signal to noise ratio of the client connected to the Access Point aiClientTxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames transmitted by the client. aiClientTxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of bytes transmitted by the client.
PAGE 44
aiClientRxDataFrames Syntax Counter32 Max-Access read-only Status current Description Total number of frames received by the client in mbps. aiClientRxDataBytes Syntax Counter32 Max-Access read-only Status current Description Total number of bytes received by the client in mbps. aiClientRxRetries Syntax Counter32 Max-Access read-only Status current Description Total number of retry frames received by the client.
PAGE 45
Chapter 4 SNMP MIBs Reference This section provides lists of the SNMP MIB OIDs that are related to Dell PowerConnect W-Instant. The following table defines the sysObjectIds for Dell PowerConnect products. Table 9 SNMP OIDs returned as sysObjectID for Dell products SNMP MIB OID aiInfoGroup 1.3.6.1.4.1.14823.2.3.3.1.1 aiStateGroup 1.3.6.1.4.1.14823.2.3.3.1.2 aiVirtualControllerKey 1.3.6.1.4.1.14823.2.3.3.1.1.1.0 aiVirtualControllerName 1.3.6.1.4.1.14823.2.3.3.1.1.2.
PAGE 46
Table 9 SNMP OIDs returned as sysObjectID for Dell products (Continued) SNMP MIB OID aiRadioChannel 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.4 aiRadioTransmitPower 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.5 aiRadioNoiseFloor 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.6 aiRadioUtilization4 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.7 aiRadioUtilization64 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.8 aiRadioUtilization64 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.3 aiRadioTxTotalFrames 1.3.6.1.4.1.14823.2.3.3.1.2.2.1.9 aiRadioTxMgmtFrames 1.3.6.1.4.1.
PAGE 47
Table 9 SNMP OIDs returned as sysObjectID for Dell products (Continued) SNMP MIB OID aiClientTxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.8 aiClientTxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.9 aiClientTxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.10 aiClientTxRate 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.11 aiClientRxDataFrames 1.3.6.1.4.1.14823.2.3.3.1.2.4.1.12 aiClientRxDataBytes 1.3.6.1.4.1.14823.2.3.3.1.2.4.13 aiClientRxRetries 1.3.6.1.4.1.14823.2.3.3.1.2.4.14 aiClientRxRate 1.3.6.1.4.1.14823.2.3.
PAGE 48
| SNMP MIBs Reference Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide
PAGE 49
Chapter 5 Traps This module defines the traps that can be generated by the IAP. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). Varbinds are defined in the Description section below. Figure 5 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.dell). The Traps are listed in the file aruba-trap.my MIB file.
PAGE 50
ai Traps Objects Group The following table lists the supported trap objects in this group: Table 10 aiTraps Objects Group OIDs 50 | Traps Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.1 wlsxTrapObjectsGroup 1 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.2 wlsxTrapObjectsGroup 2 wlsxTrapAPBSSID 1.3.6.1.4.1.14823.2.3.3.1.200.1.3 wlsxTrapObjectsGroup 3 wlsxTrapEssid 1.3.6.1.4.1.14823.2.3.3.1.200.1.4 wlsxTrapObjectsGroup 4 wlsxTrapTargetAPBSSID 1.3.6.1.4.1.14823.
PAGE 51
Table 10 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapVoltageValue 1.3.6.1.4.1.14823.2.3.3.1.200.1.33 wlsxTrapObjectsGroup 33 wlsxTrapStationBlackListReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.34 wlsxTrapObjectsGroup 34 wlsxTrapSpoofedIpAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.35 wlsxTrapObjectsGroup 35 wlsxTrapSpoofedOldPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.36 wlsxTrapObjectsGroup 36 wlsxTrapSpoofedNewPhyAddress 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 52
Table 10 aiTraps Objects Group OIDs (Continued) 52 | Traps Object Object ID wlsxTrapUpdateFailureReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.66 wlsxTrapObjectsGroup 67 wlsxTrapUpdateFailedObj 1.3.6.1.4.1.14823.2.3.3.1.200.1.67 wlsxTrapObjectsGroup 68 wlsxTrapTableEntryChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.68 wlsxTrapObjectsGroup 69 wlsxTrapGlobalConfigObj 1.3.6.1.4.1.14823.2.3.3.1.200.1.69 wlsxTrapObjectsGroup 70 wlsxTrapTableGenNumber 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 53
Table 10 aiTraps Objects Group OIDs (Continued) Object Object ID wlsxTrapAPARMChangeReason 1.3.6.1.4.1.14823.2.3.3.1.200.1.101 wlsxTrapObjectsGroup 101 wlsxTrapAPChannelSec 1.3.6.1.4.1.14823.2.3.3.1.200.1.102 wlsxTrapObjectsGroup 102 wlsxTrapUserAttributeChangeType 1.3.6.1.4.1.14823.2.3.3.1.200.1.103 wlsxTrapObjectsGroup 103 wlsxTrapAPControllerIp 1.3.6.1.4.1.14823.2.3.3.1.200.1.104 wlsxTrapObjectsGroup 104 wlsxTrapApMasterStatus 1.3.6.1.4.1.14823.2.3.3.1.200.1.
PAGE 54
wlsxTrapTargetAPBSSID Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an access point is sending the trap, then it will point to itself. wlsxTrapTargetAPSSID Syntax DisplayString(Size(0..
PAGE 55
wlsxReceiverMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the receiver. wlsxTrapTransmitterMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the transmitter.
PAGE 56
wlsxTrapAddressType Syntax ArubaAddressType Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the address type. wlsxTrapAPLocation Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the location of the AP.
PAGE 57
wlsxTrapRogueIfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBUI Rogue AP information URL. wlsxTrapVLANId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the VLAN ID.
PAGE 58
wlsxTrapCardSlot Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the slot in which this card is present. wlsxTrapTemperatureValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the temperature value. wlsxTrapProcessName Syntax DisplayString(Size(0..
PAGE 59
wlsxTrapStationBlackListReason Syntax ArubaBlackListReason Max-Access accessible-for-notify Status current Description The reason for which a station is black listed. wlsxTrapSpoofedIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in a trap to identify a spoofed IP address.
PAGE 60
wlsxTrapDBIpAddress Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the IP address of the database. wlsxTrapDBType Syntax ArubaDBType Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the port of the user. wlsxTrapVrrpID Syntax Integer32 Max-Access accessible-for-notify Status current Description This object contains the virtual router identifier.
PAGE 61
wlsxTrapESIServerName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server name. wlsxTrapESIServerIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server IP address.
PAGE 62
wlsxTrapUserPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of the user. wlsxTrapUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the user name. wlsxTrapUserRole Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Authentication method of the user.
PAGE 63
wlsxTrapInterferingAPInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue interfering access point information URL. wlsxTrapPortNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the port number.
PAGE 64
wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the transfer type, upload or download.
PAGE 65
wlsxTrapGlobalConfigObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object corresponding to the global configuration change. wlsxTrapTableGenNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the generation number of a table.
PAGE 66
wlsxTrapTunnelId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel ID. wlsxTrapTunnelStatus Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel status. wlsxTrapTunnelUpReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the tunnel up reason. wlsxTrapTunnelDownReason Syntax DisplayString(Size(0.
PAGE 67
wlsxTrapMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the master IP address. wlsxTrapLocaIIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the local IP address. wlsxTrapMasterName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the master controller name. History Added in ArubaOS 3.4.
PAGE 68
wlsxTrapSpoofedFrameType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Spoofed Frame Type wlsxTrapAssociationType Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the type of association.
PAGE 69
wlsxTrapAPName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Name of the AP. wlsxTrapApMode Syntax Integer32 Max-Access accessible-for-notify Status current Description This Object represents the AP Mode. wlsxTrapAPPrevChannel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Previous Channel.
PAGE 70
wlsxTrapAPPrevMode Syntax INTEGER{airMonitor(1),accessPoint(2),accessPointAndMonitor(3),meshPortal(4),meshPoint( 5),rfprotectSensor(6),spectrumSensor(7)} Max-Access accessible-for-notify Status current Description This Object represents the APs Previous Mode.
PAGE 71
wlsxTrapApMasterStatus Syntax INTEGER {create(1),delete(2),modify(3)} Max-Access accessible-for-notify Status current Description Status of the AP as seen by the master when the status changes. wlsxTrapCaName Syntax DisplayString (SIZE(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the name of the trustpoint. wlsxTrapCrlName Syntax DisplayString (SIZE(0..
PAGE 72
ai Traps Definitions Group Table 11 ai Traps Definitions Group OIDs 72 | Traps Object Object ID wlsxNUserEntryCreated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1014 wlsxTrapDefinitionsGroup 1014 wlsxNUserEntryDeleted 1.3.6.1.4.1.14823.2.3.3.1.200.2.1015 wlsxTrapDefinitionsGroup 1015 wlsxNUserEntryAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.1016 wlsxTrapDefinitionsGroup 1016 wlsxNUserEntryDeAuthenticated 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 73
Table 11 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxShortPreableMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1061 wlsxTrapDefinitionsGroup 1061 wlsxWPAMisconfiguration 1.3.6.1.4.1.14823.2.3.3.1.200.2.1062 wlsxTrapDefinitionsGroup 1062 wlsxAdhocNetworkDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1063 wlsxTrapDefinitionsGroup 1063 wlsxAdhocNetworkRemoved 1.3.6.1.4.1.14823.2.3.3.1.200.2.1064 wlsxTrapDefinitionsGroup 1064 wlsxStaPolicyViolation 1.3.6.1.4.1.14823.2.3.3.1.200.
PAGE 74
Table 11 ai Traps Definitions Group OIDs (Continued) 74 | Traps Object Object ID wlsxChannelFrameRetryRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1082 wlsxTrapDefinitionsGroup 1082 wlsxChannelFrameFragmentationRateEx 1.3.6.1.4.1.14823.2.3.3.1.200.2.1083 ceeded wlsxTrapDefinitionsGroup 1083 wlsxChannelFrameErrorRateExceeded 1.3.6.1.4.1.14823.2.3.3.1.200.2.1084 wlsxTrapDefinitionsGroup 1084 wlsxSignatureMatchAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 75
Table 11 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxStaAssociatedToUnsecureAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1103 wlsxTrapDefinitionsGroup 1103 wlsxStaUnAssociatedFromUnsecureAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1104 wlsxTrapDefinitionsGroup 1104 wlsxAdhocNetworkBridgeDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1105 wlsxTrapDefinitionsGroup 1105 wlsxInterferingApDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.1106 wlsxTrapDefinitionsGroup 1106 wlsxColdStart 1.3.6.1.4.1.14823.2.3.3.
PAGE 76
Table 11 ai Traps Definitions Group OIDs (Continued) 76 | Traps Object Object ID wlsxAdhocNetworkBridgeDetectedAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1146 wlsxTrapDefinitionsGroup 1146 wlsxAdhocNetworkBridgeDetectedSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.1147 wlsxTrapDefinitionsGroup 1147 wlsxDisconnectStationAttackAP 1.3.6.1.4.1.14823.2.3.3.1.200.2.1148 wlsxTrapDefinitionsGroup 1148 wlsxDisconnectStationAttackSta 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 77
Table 11 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxChopChopAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1179 wlsxTrapDefinitionsGroup 1179 wlsxFataJackAttack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1180 wlsxTrapDefinitionsGroup 1180 wlsxInvalidAddressCombination 1.3.6.1.4.1.14823.2.3.3.1.200.2.1181 wlsxTrapDefinitionsGroup 1181 wlsxValidClientMisassociation 1.3.6.1.4.1.14823.2.3.3.1.200.2.1182 wlsxTrapDefinitionsGroup 1182 wlsxMalformedHTIEDetected 1.3.6.1.4.1.14823.2.3.3.1.200.2.
PAGE 78
Table 11 ai Traps Definitions Group OIDs (Continued) 78 | Traps Object Object ID wlsxNSignatureMatch 1.3.6.1.4.1.14823.2.3.3.1.200.2.1200 wlsxTrapDefinitionsGroup 1200 wlsxNSignatureMatchNetstumbler 1.3.6.1.4.1.14823.2.3.3.1.200.2.1201 wlsxTrapDefinitionsGroup 1201 wlsxNSignatureMatchAsleap 1.3.6.1.4.1.14823.2.3.3.1.200.2.1202 wlsxTrapDefinitionsGroup 1202 wlsxNSignatureMatchAirjack 1.3.6.1.4.1.14823.2.3.3.1.200.2.1203 wlsxTrapDefinitionsGroup 1203 wlsxNSignatureMatchNullProbeResp 1.3.6.1.
PAGE 79
Table 11 ai Traps Definitions Group OIDs (Continued) Object Object ID wlsxNAdhocUsingValidSSID 1.3.6.1.4.1.14823.2.3.3.1.200.2.1022 wlsxTrapDefinitionsGroup 1222 wlsxMgmtUserAuthenticationFailed 1.3.6.1.4.1.14823.2.3.3.1.200.2.1024 wlsxTrapDefinitionsGroup 1224 wlsxNUserEntryCreated Objects wlsxTrapTime, wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress Status current Description This trap indicates that a new user was created.
PAGE 80
wlsxNAuthServerTimedOut Objects wlsxTrapTime, wlsxTrapAuthServerName, wlsxTrapAuthServerTimeout Status current Description This trap indicates that the authentication server timed out. wlsxNAuthServerIsUp Objects wlsxTrapTime, wlsxTrapAuthServerName Status current Description This trap indicates that an authentication server is up. wlsxNAccessPointIsUp Objects wlsxTrapTime, wlsxTrapAPMacAddress Status current Description A Trap which indicates that an access point up.
PAGE 81
wlsxUnsecureAPResolved Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a previously detected access point, classified as Rogue, is no longer present in the network.
PAGE 82
wlsxSSIDMisconfiguration Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected an access point that has an SSID misconfiguration because it is using an SSID that is not valid.
PAGE 83
wlsxRepeatWEPIVViolation Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected that a valid access point is using the same WEP initialization vector in consecutive packets.
PAGE 84
wlsxStaInterferenceDetected Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapNodeMac, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP has detected interference for a station.
PAGE 85
wlsxFrameLowSpeedRateExceeded Objects { wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected that a station has exceeded the configured upper threshold for Low speed rate.
PAGE 86
wlsxChannelFrameErrorRateExceeded Objects { wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP has detected that the configured upper threshold for Frame Receive Error Rate was exceeded on a channel.
PAGE 87
wlsxNodeRateAnomalySta Objects { wlsxTrapTime, wlsxTrapFrameType, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected frames transmitted or received by a node, which exceed the configured IDS rate threshold.
PAGE 88
wlsxSequenceNumberAnomalySta Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description The acceptable sequence number difference is an IDS configuration object. For more info check:http://www.wve.org/entries/show/WVE-2005-0061 http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.org/entries/show/WVE-2005-0008 http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.
PAGE 89
wlsxWirelessBridge Objects { wlsxTrapTime, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a Wireless Bridge when a WDS frame was seen between the transmitter and receiver addresses.
PAGE 90
wlsxStaAssociatedToUnsecureAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapNodeMac, wlsxTrapAPLocation, wlsxTrapAPChannel, wlsxTrapRogueInfoURL } Status current Description This trap indicates that an AM detected a client associated with a Rogue access point.
PAGE 91
wlsxAPImpersonation Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AP detected AP Impersonation because the number of beacons seen has exceeded the expected number by the configured percentage threshold.The expected number is calculated based on the Beacon Interval Field in the Beacon frame.
PAGE 92
wlsxSignAPAsleap Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for ASLEAP from an access point.For more info check:http://www.wve.
PAGE 93
wlsxSignStaNullProbeResp Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status current Description This trap indicates that an AP detected a signature match for Null-Probe-Response from a Station. For more info check:http://www.wve.
PAGE 94
wlsxAdhocNetworkBridgeDetectedAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM has detected an Ad hoc network that is bridging to a wired network wlsxAdhocNetworkBridgeDetectedSta Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Stat
PAGE 95
wlsxHT40MHzIntoleranceAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation,wlsxTrapAPChannel } Status current Description This trap indicates that an AP is detecting an access point with the HT 40MHz intolerance setting. For more info check:http://www.wve.
PAGE 96
wlsxClientFloodAttack Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that the number of potential fake clients detected by an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands. For more info check:http://www.wve.
PAGE 97
wlsxNDisconnectStationAttack Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP has determined that a client is under Disconnect Attack because the rate of Assoc/Reassoc Response packets received by that client exceeds the configured threshold. For more info check:http://www.wve.
PAGE 98
wlsxFataJackAttack Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapBackupControllerIp, wlsxTrapPrimaryControllerIp } Status current Description This trap indicates that an AP detected a FATA-Jack attack. For more info check:http://www.wve.
PAGE 99
wlsxOverflowIEDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a management frame with a malformed information element. The declared length of the element is larger than the entire frame containing the element. This may be used to corrupt or crash wireless drivers. For more info check:http://www.
PAGE 100
wlsxCTSRateAnomaly Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that the rate of CTS packets received by an AP exceeds the configured IDS threshold..
PAGE 101
wlsxNSuspectRogueAPDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel, wlsxTrapConfidenceLevel Status current Description This trap indicates that an access point, classified as Suspected Rogue, is detected by the system. The AP is suspected to be rogue with the supplied confidence level.
PAGE 102
wlsxNSignatureMatchNetstumbler Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Netstumbler in a frame. For more info check:http://www.wve.
PAGE 103
wlsxNSignatureMatchDisassocBcast Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Max-Access Status current Description This trap indicates that an AP detected a signature match for Disassoc-Broadcast in a frame. For more info check:http://www.wve.org/entries/show/WVE-2005-0019 http://www.wve.
PAGE 104
wlsxClientWiredContainment Objects wlsxTrapTime, wlsxTrapNodeMac, wlsxTrapTargetAPBSSID, wlsxTrapDeviceIpAddress, wlsxTrapDeviceMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface.
PAGE 105
wlsxAPPowerChange Objects wlsxTrapTime, wlsxTrapAPTxPower, wlsxTrapAPPrevTxPower, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP changed its transmit power level. wlsxAPModeChange Objects wlsxTrapTime, wlsxTrapAPCurMode, wlsxTrapAPPrevMode, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that an AP changed its mode from AP to APMonitor or vice versa.
PAGE 106
wlsxMgmtUserAuthenticationFailed 106 | Traps Objects wlsxTrapTime, wlsxTrapUserName, wlsxTrapUserIpAddress, wlsxTrapAuthServerName Status current Description This trap indicates that a management user authentication has failed.
PAGE 107
Index A S Agents 20 Sequence 21 Status 21 Syntax 21 D Description 21 E Entry 26 G group 26 H T Traps MIB hierarchy 49 X xTrapLocaIIp 67 History ArubaOS 3.
PAGE 108
| Index Dell PowerConnect W-Series Instant Access Point | MIB Reference Guide