User guide

Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 37
Figure 25 Band and Hide SSID Settings
4. Click Next and set appropriate security levels using the slider button in the Security tab. Default selection is
Personal. Available options are Enterprise, Personal, and Open.
Table 6 Conditions for Adding an Employee Network - Security Tab
If then,
You select the Enterprise security level Perform the following steps:
1. Select the required key options from the Key management drop-
down list. Available options are:
 WPA-2 Enterprise
 WPA Enterprise
 Both (WPA-2 & WPA)
 Dynamic WEP with 802.1x
2. Select the required Authentication server option from the
Authentication server 1drop-down list. Available options are:
 External - If you select this option, then an external radius server
has to be configured to authenticate the users. For information
on configuring an external RADIUS server, see Chapter 9,
“Authentication” .
 Internal Server- If you select this option, then users who are
required to authenticate with the internal RADIUS server must
be added. Click the Users link to add the users.
For information on adding a user, see “Adding a User” on page 133.