User guide

Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 41
5. Click Next. The Access tab appears. The Allow any to all destinations access rule is enabled by default. This
rule allows traffic to all destinations. Instant Firewall treats packets based on the first rule matched. For more
information, see Chapter 12, “Instant Firewall” .
To edit the default rule, perform the following steps:
a. Select the rule and click the Edit button.
b. Select appropriate options in the Edit Rule box and click OK.
To define an access rule, perform the following steps:
a. Click the New button.
b. Select appropriate options in the New Rule box.
c. Click OK.
Figure 29 Adding an Employee Network - Access Rules Tab - Network
6. Click Finish. The network is added and listed in the Networks tab.
Voice Network
Use the Voice network type when you want devices that provide only voice services like handsets or only
applications that require voice-like prioritization need connectivity.
Adding a Voice Network
This section provides the procedure to add a voice network.
1. In the Networks tab, click the New link. The New Network box appears.