User guide

46 | Wireless Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide
Figure 32 Adding a Guest Network - Splash Page Settings
5. Select the Encryption check box and perform the following steps (These steps are optional):
a. Select the required key management option from the Key management drop-down list. Available options
are:
 WPA-2 Personal
 WPA Personal
 Both (WPA-2 & WPA)
 Static WEP. If you selected Static WEP, then do the following:
1. Select the appropriate WEP key size from the WEP key size drop-down list. Available options are
64-bit and 128-bit.
2. Select the appropriate Tx key from the Tx Key drop-down list. Available options are 1,2,3, and 4.
3. Enter an appropriate WEP key in the WEP Key text box and reconfirm.
4. Enter a passphrase in the Passphrase text box and reconfirm.