Concept Guide

Table Of Contents
1010| show ap config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Telnet Disabled Disabled ap system-profile
"default"
FIPS enable Disabled Disabled ap system-profile
"default"
SNMP sysContact N/A N/A ap system-profile
"default"
RFprotect Server IP N/A N/A ap system-profile
"default"
RFprotect Backup Server IP N/A N/A ap system-profile
"default"
AeroScout RTLS Server N/A N/A ap system-profile
"default"
RTLS Server configuration N/A N/A ap system-profile
"default"
Remote-AP DHCP Server VLAN N/A N/A ap system-profile
"default"
Remote-AP DHCP Server Id 192.168.11.1 192.168.11.1 ap system-profile
"default"
Remote-AP DHCP Default Router 192.168.11.1 192.168.11.1 ap system-profile
"default"
Remote-AP DHCP Pool Start 192.168.11.2 192.168.11.2 ap system-profile
"default"
Remote-AP DHCP Pool End 192.168.11.254 192.168.11.254 ap system-profile
"default"
Remote-AP DHCP Pool Netmask 255.255.255.0 255.255.255.0 ap system-profile
"default"
Remote-AP DHCP Lease Time 0 days 0 days ap system-profile
"default"
Heartbeat DSCP 0 0 ap system-profile
"default"
Session ACL N/A N/A ap system-profile
"default"
Image URL N/A N/A ap system-profile
"default"
Maintenance Mode Disabled Disabled ap system-profile
"default"
...
The output of this command includes the following parameters.
Parameter Description
LMS IP
The IPv4 address of the
local management switch
(LMS)—the Dell controller
which is responsible for
terminating user traffic
from the APs, and
processing and
forwarding the traffic to
the wired network.