Concept Guide

1016| show ap config Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
High throughput enable (radio)
Shows if high-throughput
(802.11n) features on the
2.4 GHz frequency band
are enabled or disabled.
Channel
Shows the channel
number for the AP’s
802.11a/802.11n physical
layer.
Beacon Period
Shows the time, in
milliseconds, between
successive beacon
transmissions. The
beacon advertises the
AP’s presence, identity,
and radio characteristics
to wireless clients.
Beacon Regulate
Enabling this setting
introduces randomness in
the beacon generation so
that multiple APs on the
same channel do not send
beacons at the same time,
which causes collisions
over the air.
Transmit EIRP
Shows the current
transmission power level.
Advertise 802.11d and 802.11h Capabilities
This column reports
whether or not the AP will
advertise its 802.11d
(Country Information) and
802.11h (TPC or Transmit
Power Control)
capabilities
TPC Power
The transmit power
advertised in the TPC IE of
beacons and probe
responses. Range: 0-51
dBm
Spectrum Load Balancing
The Spectrum Load
Balancing feature helps
optimize network
resources by balancing
clients across channels,
regardless of whether the
AP or the controller is
responding to the wireless
clients' probe requests.