Concept Guide

Parameter Description
If enabled, the controller
compares whether or not
an AP has more clients
than its neighboring APs
on other channels. If an
AP’s client load is at or
over a predetermined
threshold as compared to
its immediate neighbors,
or if a neighboring Dell AP
on another channel does
not have any clients, load
balancing will be enabled
on that AP. This feature is
disabled by default.
Spectrum Load Balancing mode
Spectrum Load Balancing
Mode allows control over
how to balance clients.
Select one of the following
options
l channel: Channel-
based load-balancing
balances clients across
channels. This is the
default load-balancing
mode
l radio: Radio-based
load-balancing
balances clients across
APs
Spectrum load balancing update interval
This value determines
how often spectrum load
balancing calculations are
made (in seconds). The
default value is 30
seconds.
Advertised regulatory max EIRP
A cap for an radio’s
maximum equivalent
isotropic radiated power
(EIRP). Even if the
regulatory approved
maximum for a given
channel is higher than this
EIRP cap, the AP radio
using this profile will
advertise only this capped
maximum EIRP in its radio
beacons.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap config | 1017