Concept Guide

Parameter Description
Management Frame Throttle Limit
Maximum number of
management frames that
can come from this radio
in each throttle interval.
ARM/WIDS Override
Shows if Adaptive Radio
Management (ARM) and
Wireless IDS functions are
enabled or disabled. If a
radio is configured to
operate in Air Monitor
mode, then these
functions are always
enabled, regardless of this
option.
Protection for 802.11b Clients
Displays whether or not
protection for 802.11b
clients is enabled or
disabled.
Maximum Distance
Maximum distance
between a client and an
AP or between a mesh
point and a mesh portal, in
meters. This value is used
to derive ACK and CTS
timeout times. A value of 0
specifies default settings
for this parameter, where
timeouts are only
modified for outdoor
mesh radios which use a
distance of 16km.
The upper limit for this
parameter varies,
depending on the 20/40
MHz mode for a 2.4GHz
frequency band radio:
l 20MHz mode: 54km
l 40MHz mode: 24km
Iff you configure a value
above the supported
maximum, the maximum
supported value will be
used instead. Values
below 600m will use
default settings.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap config | 1021