Concept Guide

<group> local status up to view a list of local APs within a specific AP group that are reporting an up status.
Include the sort-by and sort-direction keywords to specify how the data is sorted in the output of this
command.
Examples
The output of the command show ap database shows the controller’s database of information for APs in the
group default. The output also includes a description of the flag types that may appear in the Flags column.
show ap database group default
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
00:24:6c:cb:d7:48 default 92 172.20.72.233 Down 172.20.1.103 0.0.0.0
W-AP105-F2:EC default 92 172.20.72.234 Up 2d:1h:59m:51s 172.20.1.103 0.0.0.0
W-AP105-F3:48 default 92 172.20.72.238 Up 2d:1h:59m:25s 172.20.1.103 0.0.0.0
W-AP105-00:01 default 105 172.20.72.232 Up 2d:1h:59m:47s 172.20.1.103 0.0.0.0
W-AP105-0D:E7 default 105 172.20.72.231 Up 2d:1h:59m:13s 172.20.1.103 0.0.0.0
W-AP204-35-A2 default 120 172.20.72.243 Down 172.20.1.103 0.0.0.0
W-AP204-29:3A default 124 172.20.72.252 Up 2d:2h:0m:22s 172.20.1.103 0.0.0.0
W-AP204-5B:2A default 124abg 172.20.72.245 Up 2d:2h:0m:43s 172.20.1.103 0.0.0.0
W-AP204-D7:D6 default 124 172.20.72.244 Up 2d:2h:0m:25s 172.20.1.103 0.0.0.0
W-AP204-E5:41 default 124 172.20.72.248 Up 2d:2h:0m:10s 172.20.1.103 0.0.0.0
W-AP204-F3:CE default 124 172.20.72.242 Up 2d:2h:0m:5s 172.20.1.103 0.0.0.0
W-AP204-F3:DE default 124 172.20.72.247 Up 2d:2h:0m:32s 172.20.1.103 0.0.0.0
W-AP204-F3:EA default 124 172.20.72.246 Up 2d:2h:0m:40s 172.20.1.103 0.0.0.0
W-AP204-53:56 default 125 172.20.72.237 Up 2d:2h:0m:15s 172.20.1.103 0.0.0.0
W-AP135-7F:A0 default 135 172.20.72.240 Up 2d:2h:0m:35s 172.20.1.103 0.0.0.0
VW-092-96:18 default 92 172.20.72.253 Up 2d:2h:2m:4s 172.20.1.103 0.0.0.0
VW-092-F3:03 default 92 172.20.72.235 Up 2d:1h:59m:53s 172.20.1.103 0.0.0.0
VW-092-F3:70 default 92 172.20.72.236 Up 2d:1h:59m:52s 172.20.1.103 0.0.0.0
VW-134-11:3C default 134 172.20.72.239 Up 2d:2h:0m:3s 172.20.1.103 0.0.0.0
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch
X = Maintenance Mode; P = PPPoE AP; B = Built-in AP; s = LACP striping
R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;
c = CERT-based RAP; 1 = 802.1X authenticated AP; 2 = Using IKE version 2
u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP
M = Mesh node; Y = Mesh Recovery
Total APs:19
Related Commands
Command Description Mode
show ap database-summary
To display a more general summary
overview of the AP registered to a controller,
use the command show ap database-
summary.
Enable and Config
modes
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap database | 1047