Concept Guide

Table Of Contents
show ap debug dot11r
show ap debug dot11r
efficiency <client-mac>
state [ap-name <ap-name> | ip-addr <ip-addr>]
Description
This command displays all the r1 keys that are stored in an AP and the hit/miss rate of r1 keys cached on an AP
before a Fast BSS Transition roaming.
Syntax
Parameter Description
efficiency <client-mac>
Show the hit/miss rate of r1 keys cached on an AP before a Fast BSS
Transition roaming for the specified client MAC address.
state
Show all the r1 keys that are stored in an AP based on the filter specified.
ap-name <ap-name>
Show debugging information for a specific AP.
ip-addr <ip-addr>
Show debugging information for an AP with a specific IP address by entering
its IP address in dotted-decimal format.
Examples
Use this command to view all the r1 keys that are stored in an AP. You can filter the output based on the AP
name or IP address.
(host) #show ap debug dot11r state ap-name MAcage-105-GL
Stored R1 Keys
--------------
Station MAC Mobility Domain ID Validity Duration R1 Key
----------- ------------------ ----------------- ------
00:50:43:21:01:b8 1 3568 (32): 94 ff 18 0a 5f 47 8b 3e 95 2b
93 31 bd 44 58 fe fe 6a ad aa 1d d7 29 94 fb 5b 7c 15 76 66 d2 1f
Use this command to view the hit/miss rate of r1 keys cached on an AP before a Fast BSS Transition roaming.
This counter helps to verify if enough r1 keys are pushed to the neighboring APs.
(host) #show ap debug dot11r efficiency
Fast Roaming R1 Key Efficiency
------------------------------
Client MAC Hit (%) Miss (%)
---------- ------- --------
00:50:43:21:01:b8 0 (0%) 0 (0%)
Command History
Introduced in ArubaOS 6.3.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug dot11r | 1095