Concept Guide

show ap debug dot11r state
show ap debug dot11r state [ap-name <ap-name> | ip-addr <ip-addr>]
Description
This command displays all the r1 keys that are stored in an AP.
Syntax
Parameter Description
ap-name <ap-name>
Show debugging information for a specific AP.
ip-addr <ip-addr>
Show debugging information for an AP with a specific IP address by entering
its IP address in dotted-decimal format.
Examples
Use this command to view all the r1 keys that are stored in an AP. You can filter the output based on the AP
name or IP address.
(host) #show ap debug dot11r state ap-name MAcage-105-GL
Stored R1 Keys
--------------
Station MAC Mobility Domain ID Validity Duration R1 Key
----------- ------------------ ----------------- ------
00:50:43:21:01:b8 1 3568 (32): 94 ff 18 0a 5f 47 8b 3e 95 2b
93 31 bd 44 58 fe fe 6a ad aa 1d d7 29 94 fb 5b 7c 15 76 66 d2 1f
Command History
Introduced in ArubaOS 6.3.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug dot11r state | 1097