Concept Guide

aaa tacacs-accounting
aaa tacacs-accounting server-group <group>
command {action|all|configuration|show}
mode {enable|disable}
Description
This command configures reporting of commands issued on the controller to a TACACS+ server group.
Syntax
Parameter Description Range Default
server-group <group>
The TACACS server group to which the
reporting is sent.
— —
command
The types of commands that are reported to the
TACACS server group.
— —
action
Reports action commands only. — —
all
Reports all commands. — —
configuration
Reports configuration commands only — —
show
Reports show commands only — —
mode
Enables accounting for the server group. enable/
disable
disable
d
Usage Guidelines
You must have previously configured the TACACS+ server and server group (see aaa authentication-server
tacacs on page 47 and aaa server-group on page 107).
Example
The following command enables accounting and reporting of configuration commands to the server-group
“tacacs1”:
aaa tacacs-accounting server-group tacacs1 mode enable command configuration
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa tacacs-accounting | 111