Concept Guide

Data Structures
----------------
ap sta pap psta ch msg-hash ap-l
-- --- --- ---- -- -------- ----
20 40 17 55 24 21 20
Other Parameters
-----------------
key value
--- -----
WMS on Master disabled
Stats Update Interval 60
Poll Interval 174000
Num Switches 1
Collect Stats enabled
WLAN Interface Switch Status
-----------------------------
Bssid Type Status Last-reg N-reg Last-update Next-update N-updates Last-
ack
----- ---- ------ -------- ----- ----------- ----------- --------- ------
--
00:1a:1e:11:5f:10 local up 3321891 3821 3322965 197 10368
3322965
00:1a:1e:11:5f:00 local up 3321891 3821 3322917 187 10378
3322965
RTLS Configuration and State
-----------------------------
Type Server IP Port Freq Active Rpt-Tags Tag-Mcast-Addr Tags-Sent Rpt-Sta
Incl-Unassoc-Sta Sta-Sent Cmpd-Msgs-Sent
---- --------- ---- ---- ------ -------- -------------- --------- ------- ---
------------- -------- --------------
MMS N/A N/A N/A disable 01:0c:cc:00:00:00 N/A disable N/A
N/A N/A
Aeroscout N/A N/A 30 * disable 00:00:00:00:00:00 N/A enable
disable 2610 265
RTLS N/A N/A 20 * disable 01:18:8e:00:00:00 N/A enable
enable
The output of this command includes the following information:
Column Description
bssid
The Basic Service Set Identifier (BSSID) for the AP. This is usually the AP’s
MAC address.
scan
Indicates whether or not if active scanning is enabled on this AP.
monitor
Indicates whether the AP radio is currently enabled or disabled.
probe-type
This parameter displays one of the following options to show the AP is
configured.
l sap: Default AP setting.
l am: AP is configured as an Air Monitor.
l m-portal: AP is configured as a Mesh portal.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap monitor debug | 1222