Concept Guide

Table Of Contents
1240| show ap provisioning Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Column Description
USB Dial String
The dial string for the USB modem. This parameter only needs to
be specified if the default string is not correct.
USB Initialization String
The initialization string for the USB modem. This parameter only
needs to be specified if the default string is not correct.
USB TTY device data path
The TTY device path for the USB modem. This parameter only
needs to be specified if the default path is not correct.
USB TTY device control path
The TTY device control path for the USB modem. This parameter
only needs to be specified if the default path is not correct.
Uplink VLAN
If you configured an uplink VLAN on an AP connected to a port in
trunk mode, the AP sends and receives frames tagged with this
VLAN on its Ethernet uplink.
By default, an AP has an uplink vlan of 0, which disables this
feature.
Link Priority Ethernet
Set the priority of the wired uplink, from 0-255. Each uplink type
has an associated priority; wired ports having the highest priority
by default.
Link Priority Cellular
The priority of the cellular uplink, from 0-255. By default, the
cellular uplink is a lower priority than the wired uplink; making the
wired link the primary link and the cellular link the secondary or
backup link.
Mesh Role
If the mesh role is “none,” the AP is operating as a thin AP. An AP
operating as a mesh node can have one of two roles: mesh portal
or mesh point.
Installation
Indicates the type of installation (indoor or outdoor). The default
parameter indicates that the installation mode is determined by
the AP model type.
Latitude
Latitude coordinates of the AP, in the format Degrees Minutes
Seconds (DMS).
Longitude
Longitude coordinates of the AP, in the format Degrees Minutes
Seconds (DMS).
Altitude
Altitude, in meters, of the AP. This parameter is supported on
outdoor APs
only.
Antenna bearing for 802.11a
Horizontal coverage distance of the 802.11a (5GHz) antenna from
true north, from 0-360 degrees.
NOTE: This parameter is supported on outdoor APs only. The
horizontal coverage pattern does not consider the elevation or
vertical antenna pattern.