Concept Guide

1244| show ap provisioning-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
USB Initialization String N/A
USB TTY device data path N/A
USB TTY device control path N/A
USB modeswitch parameters N/A
Link Priority Ethernet 0
Link Priority Cellular 0
Cellular modem network preference auto
Username of AP so that AP can authenticate to 802.1X using PEAP N/A
Password of AP so that AP can authenticate to 802.1X using PEAP N/A
Uplink VLAN 0
USB power mode auto
AP POE Power optimization disabled
Description
This command defines a provisioning profile for an AP or group of APs.
Syntax
Parameter Description
Remote-AP
Indicates that the profile is associated with a remote AP using
certificates.
Master IP/FQDN
The FQDN or IP address for the master controller.
PPPOE User Name
PPPoE username for the AP.
PPPOE Password
Point-to-Point Protocol over Ethernet (PPPoE) password for the AP.
PPPOE Service Name
PPPoE service name for the AP.
USB User Name
The PPP username provided by the cellular service provider
USB Password
A PPP password, if provided by the cellular service provider
USB Device Type
The USB driver type.
USB Device Identifier
The USB device identifier.
USB Dial String
The dial string for the USB modem. This parameter only needs to
be specified if the default string is not correct.
USB Initialization String
The initialization string for the USB modem. This parameter only
needs to be specified if the default string is not correct.
USB TTY device data path
The TTY device path for the USB modem. This parameter only
needs to be specified if the default path is not correct.
USB TTY device control path
The TTY device control path for the USB modem. This parameter
only needs to be specified if the default path is not correct.