Concept Guide

Column Description
Status
Current AP status. If the AP is currently up, this data column also
shows the amount of time for which the AP has been active.
Flags
This column displays a letter that corresponds to some type of
additional information for the AP. The key to the list of possible flags
appears at the bottom of the output of this command.
Switch IP
IP address of the AP’s controller.
11g Mode/Chan/EIRP/Cli
802.1g radio type and mode/802.11g radio channel used by the
AP/current Effective Isotropic Radiated Power (EIRP)/Number of
Clients associated with the radio
11a Mode/Chan/EIRP/Cli
802.1a radio type and mode/802.11a radio channel used by the
AP/current Effective Isotropic Radiated Power (EIRP)/Number of
Clients associated with the radio.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap radio-database | 1249