Concept Guide

1330| show ap system-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Column Description
AP multicast aggregation
Displays the status of multicast aggregation at AP.
AP ARP attack protection
Drop ARP packets coming from wired or wireless
clients with AP gateway IP address. In other words,
disallow ARP attack from un-trusted ports.
AP multicast aggregation allowed VLANs
Displays a list of VLANs where APmulticast
aggregation is allowed.
Console enable
Displays if the console port of the AP is enabled.
AP Console Protection
Displays if the AP console password is enable.
AP Console Password
Displays the AP console password set on the
controller.
NOTE: The password string is encrypted. You can
view the password string by executing the encrypt
disable command followed by the show ap system-
profile <profile-name> command.
Password for Backup
Displays the WPA passphrase for backup Virtual AP.
AP USB Power override
Displays the AP USB power override status. Enabling
override enables the USB port of the AP with POE AT
power.
NOTE: This parameter is applicable for W-AP205H
access point only.
RF Band for Backup
If the system profile is enabled AP console access
using a backup ESSID, this parameter
Operation for Backup
This parameter allows AP console access using a
backup ESSID, allowing users to access an AP console
after the AP has disconnected from the controller.
When the AP advertises a backup ESSID in either
static or dynamic mode, a user is able to access and
debug the APremotely through a virtual AP. This
feature is disabled by default.
BLE Endpoint URL
Displays the URL of the Meridian server to which the
Bluetooth Low Energy (BLE) sends monitoring data.
BLE Auth Token
Displays the BLE endpoint authorization token. This
token is unique for each deployment.
BLE Operation Mode
Displays the BLE operation mode of the AP.