Concept Guide

1346| show ap wired-port-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Wired AP profile
Name of a wired AP profile to be used by devices connecting the AP’s wired
port. The wired AP profile defines the forwarding mode and switchport values
used by the port.
Ethernet interface
link profile
An Ethernet Link profile to be used by devices connecting to the AP’s wired
port profile. This profile defines the duplex value and speed to be used by the
port.
AP LLDP Profile
Name of an LLDP Profile associated with this wired port.
Shut Down?
Shows if the wired AP port is enabled (no) or disabled (yes).
Remote AP Backup
Use the rap-backup parameter to use the wired port on a Remote AP for local
connectivity and troubleshooting when the AP cannot reach the controller. If
the AP is not connected to the controller, no firewall policies will be applied
when this option is enabled. (The AAA profile will be applied when the AP is
connected to controller).
AAA Profile
Name of a AAA profile to be used by devices connecting to the AP’s wired
port.
Bridge Role
Role that is assigned to a user if split-tunnel authentication fails.
Time to wait for
authentication to succeed
Authentication timeout value, in seconds, for devices connecting the AP’s
wired port. The supported range is 1-65535 seconds, and the default value is
20 seconds.
Spanning Tree
Enables the spanning tree protocol.
PortFast
Enables portfast on access mode ports.
PortFast on Trunk
Enables portfast on trunk mode ports.
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers