Concept Guide

1433| show datapath Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
utilization
vlan {ap-name <ap-name>}|{ip-addr <ip-address>|table}
vlan-mcast
web-cc [counters]
wifi-reassembly counters
wmm counters
Descriptions
Displays system statistics for your controller.
Syntax
Parameter Description
acl id <id-name>
Displays datapath statistics associated with a
specified ACL. The ACL index is found in the show
rights command.
amsdu tx
Shows datapath AMSDU TX queue statistics
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP
application counters
Shows application counters and errors generated by
applications running on a particular AP. These include
stateful firewall application layer statistics.
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP.
bridge
Shows bridge table entry statistics including MAC
address, VLAN, assigned VLAN, Destination and flag
information for an AP.
ap-name <ap-name>
Name of the AP. Shows MAC address, VLAN, assigned
VLANs, destination and flags information.
counters
Shows datapath bridge table statistics such as current
entries, high water mark, maximum entries, total
entries, allocation failures and max link length.
ip-addr <ip-address>
IP address of the AP. Shows MAC address, VLAN,
assigned VLANs, destination and flags information.
table <macaddr>
Displays the current high, maximum, and total number
of bridge table entries for the Dell controller.
verbose
Displays datapath bridge details in a tabular format.