Concept Guide

Parameter Description
exthdr
Displays the datapath default IPv6 Extended Header
Map.
firewall-agg-sess
Displays the datapath firewall aggregated sessions
table.
counters
Displays the datapath aggregate session statistics.
fqdn
Displays datapath fully qualified domain name (FQDN)
entries.
frame counters
Displays frame statistics that are received and
transmitted from the data path of the controller.
Several output fields include the following
descriptions:
l Descr failures-This is the number of times a
packet descriptor was not available and the packet
dropped.
l Dot1QDiscards-The number of packets received
on a trunk port where the VLAN presented did not
match any configured on the controller and the
packet dropped.
l Dot1d Discards-Spanning tree is disabled and
each BPDU frame is counted and dropped.
l Denied Frames-Frames that are denied by the
ACL's data path of the controller.
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP.
hardware
Displays datapath hardware counters and hardware
packet statistics information.
internal
Internal details are displayed.
dir <dir>
Hardware directory
file <file>
File in the directory.
ip-fragment-table
Displays ip-fragment statistics including CPU, current
entries, high water mark, max , total, and aged entries.
ipv4
Displays IPv4 fragment statistics.
ipv6
Displays IPv6 fragment statistics.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show datapath | 1436