Concept Guide

1489| show firewall Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
Blacklist ARP attack client
If enabled, blacklist clients exceeding the ARP
attack rate.
Monitor ARP attack
Shows the status of the ARP attack monitor.
Monitor Gratuitous ARP attack
Shows the status of the Gratuitous ARP attack
monitor.
GRE call id processing
If active the controller creates a unique state for
each PPTP tunnel.
Session Idle Timeout
Shows if a session idle timeout interval has been
defined.
WMM content enforcement
If traffic to or from the user is inconsistent with
the associated QoS policy for voice, this feature
reclassifies traffic to best effort and data path
counters are incremented.
Session VOIP Timeout
If enabled, a idle session timeout is defined for
sessions that are marked as voice sessions.
Stateful H.323 Processing
Shows if the controller has enabled or disabled
stateful H.323 processing.
Stateful SCCP Processing
Shows if the controller has enabled or disabled
stateful SCCP processing.
Only allow local subnets in user table
If enabled, the controller only adds IP addresses
which belong to a local subnet to the user table.
Monitor/police CP attacks
If enabled, the controller monitors a misbehaving
user’s inbound traffic rate. If this rate is
exceeded, the controller can register a denial of
service attack.
Rate limit CP untrusted ucast traffic
Shows the inbound traffic rate
Rate limit CP untrusted mcast traffic
Displays the untrusted multicast traffic rate limit.
Rate limit CP trusted ucast traffic
Displays the trusted unicast traffic rate limit.
Rate limit CP trusted mcast traffic
Displays the trusted multicast traffic rate limit.
Rate limit CP route traffic
Displays the traffic rate limit for traffic that
needs generated ARP requests.