Concept Guide

Table Of Contents
show ids profile
show ids profile <profile-name>
Description
Display all ids profiles or display a specific profile name.
Syntax
Parameter Description
<profile-name>
Name of an IDS profile.
Usage Guidelines
Issue this command without the <profile-name>parameter to display the list of IDS profiles. Include a profile
name to display detailed information for that profile.
Examples
The example below shows that the controller has seven configured IDS Profiles.
(host) (config) #show ids profile
IDS Profile List
----------------
Name References Profile Status
---- ---------- --------------
default 5
test 0
test-tarpit 1
test-wired-lb 0
test1 0
Wizard-test 0
Wizard-test2 0
Total:7
In the example above, the Reference column indicates the number of references to the profile named in the
Name column. The Profile Status column is blank unless the rule is predefined.
This example displays the configuration settings for the profile test1.
(host) (config) #show ids profile test1
IDS Profile "test1"
-------------------
Parameter Value
--------- -----
IDS General profile test1
IDS Signature Matching profile test1
IDS DOS profile test1
IDS Impersonation profile test1
IDS Unauthorized Device profile test1
The output of this command includes the following parameters:
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ids profile | 1535