Concept Guide

1587| show ip access-list Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
l Session
l MAC
l Extended
l Geolocation
Use Count Number of rules defined in the ACL.
Roles Names of user roles associated with the ACL.
Include the name of a specific ACL to show detailed configuration information for that ACL. The output in the
example below has been divided into two sections to better fit int this document. The output in the command-
line interface will appear in a single, long table.
(host)# show ip access-list captiveportal6
ip access-list session captiveportal6
captiveportal6
--------------
Priority Source Destination Service Action NextHopList TimeRange Log Expired
-------- ------ ----------- ------- ------ ----------- --------- --- -------
1 user controller6 svc-https captive
2 user any svc-http captive
3 user any svc-https captive
4 user any svc-http-proxy1 captive
5 user any svc-http-proxy2 captive
6 user any svc-http-proxy3 captive
6
Queue TOS 8021P Blacklist Mirror DisScan ClassifyMedia IPv4/6
----- --- ----- --------- ------ ------- ------------- ------
Low 6
Low 6
Low 6
Low 6
Low 6
Low 6
The output of the show ip access-list command may include some or all of the following parameters:
Parameter Description
Priority Name of an access-control list (ACL).
Source The traffic source, which can be one of the following:
l alias: The network resource (use the netdestination command to configure aliases;
use the show netdestination command to see configured aliases)