Concept Guide

ap debug radio-registers dump
ap debug radio-registers dump [ap-name <name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>] [filename
<filename> {all|interrupt|qcu |radio}]
Description
This command allows you to collect all or specific radio register information into a separate file.
Syntax
Parameter Description
ap-name
Name of Access Point
ip-addr
Collect radio register information for this specific AP radio.
ip6-addr
Collect radio register information for the AP assigned to this ipv6 address.
filename
Name of file where information is collected.
all
All registers interrupted.
interrupt
Interrupt related registers.
qcu
Collect QCU information.
radio
Radio ID(0 or 1)
Usage Guidelines
This command collects specified radio-register information for debugging purposes, dumps the registers into a
local file, and will automatically transfer the file to the dump-server that is configured in 'ap-system-profile.'
Example
The following command collects all radio registers from myap1 into a file called myradioregfile.:
#ap debug radio-registers dump ap-name myap1 filename myradioregfile all
Command History
Introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
802.11n-capable APs
Base operating system Enable mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap debug radio-registers dump | 161