Concept Guide

Table Of Contents
show ip pppoe-info
show ip pppoe-info
Description
Display configuration settings for Point-to-Point Protocol over Ethernet (PPPoE).
Syntax
No parameters.
Examples
The example below shows the current PPPoE configuration.
(host) #show ip pppoe-info
PPPoE username: rudolph123
PPPoE password: <HIDDEN>
PPPoE service name: ppp2056
PPPoE VLAN: 22
The output of this command includes the following parameters:
Parameter Description
PPPoE username
PAP username configured on the PPPoE access concentrator.
PPPoE password
If this parameter displays the word <HIDDEN>, a PAP password is configured on
the PPPoE access concentrator. If this parameter is <NONE>, there is no PPOE
password configured.
PPPoE service name
PPPoE service name.
PPPoE VLAN
VLAN configured to use PPPoE to obtain an IP address via the command interface
vlan <id> ip address pppoe.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Available in Config or Enable mode on
master or local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ip pppoe-info | 1614