Concept Guide

Table Of Contents
show ip radius
show ip radius nas-ip|source-interface
Description
Display global parameters for configured RADIUS servers.
Syntax
Command Description
nas-ip
Show the Network Access Server (NAS) IP address attribute sent in
outgoing RADIUS requests
source-interface
Show the source address of outgoing RADIUS requests
Examples
The example below shows the RADIUS client NAS IP address.
(host) #show ip radius nas-ip
RADIUS client NAS IP address = 10.168.254.221
Related Commands
Command Description
ip radius
This command configures global parameters for configured RADIUS
servers.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Available in Config or Enable mode on
master or local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ip radius | 1617