Concept Guide

show ipc statistics app-ap
show ipc statistics app-ap {am|sapd|sta} {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-
addr>}
Description
Display Inter Process Communication (IPC) statistics for a specific AP or BSSID.
Syntax
Parameter Description
am
Show IPC statistics for an air monitor.
sapd
Show IPC statistics for the SAPD process.
stm
Show IPC statistics for station management communications.
ap-name <ap-name>
Show IPC statistics for an AP with a specific name.
bssid <bssid>
Show IPC statistics for a specific Basic Service Set Identifier (BSSID). An
AP’s BSSID is usually the AP’s MAC address.
ip-addr <ip-addr>
Show IPC statistics for an AP with a specific IP address. Enter the IP address
in dotted-decimal format.
Usage Guidelines
Issue this command at the request of Dell support to troubleshoot application errors.
Example
The following example shows IPC statistics for the SAPD process on an AP named mpp125.
(host) #show ipc statistics app-ap sapd ap-name mpp125
Local Statistics
To application Tx Msg Tx Blk Tx Ret Tx Fail Rx Ack Rx Msg Rx Drop Rx Err Tx
Ack
MESH 3 0 1 0 3 1 1 0
1
RF Client 1 0 0 0 1 1 0 0
1
STM 1 0 0 0 1 0 0 0
0
Nanny 1 0 0 0 1 0 0 0
0
Remote Statistics
To application Tx Msg Tx Blk Tx Ret Tx Fail Rx Ack Rx Msg Rx Drop Rx Err Tx
Ack
AMAPI CLI Client 0 0 0 0 0 1 0 0
1
STM 248 0 0 0 0 248 0 0
0
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ipc statistics app-ap | 1621