Concept Guide

Table Of Contents
show lacp sys-id
show lacp sys-id
Description
View the LACP system MAC address and port priority.
Example
This command returns the port priority and the MAC address (comma separated). In the example below, the
port priority is the default value 32768 followed by the MAC address 00:0B:86:40:37:C0.
(Host)#show lacp sys-id
32768,00:0B:86:40:37:C0
Related Commands
Command Description
lacp group Enable LACP and configure on the interface
lacp port-priority Configure the LACP port priority
show lacp View the LACP configuration status
show interface port-channel View information on a specified port channel interface
Command History
Release Modification
ArubaOS 3.4.1 Command introduced
Command Information
Platform Licensing Command Mode
All Platforms Base operating system Enable and Configuration modes (config)
for Master and Local controller
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show lacp sys-id | 1660