Concept Guide

Table Of Contents
show log network
show log network{[<number>][all]}
Description
Show the controller’s system network errors.
Syntax
Parameter Description
<number>
Start displaying the log output from the specified number of lines from the
end of the log.
all
Shows all the network logs for the controller.
Example
This example shows the controller’s recent network log errors
(host) #show log network all
Feb 17 14:47:14 :209801: <WARN> |fpapps| Physical link down: port 1/1
Feb 17 14:48:04 :209801: <WARN> |fpapps| Physical link down: port 1/1
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Available in Enable and Config modes.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show log network | 1710