Concept Guide

Table Of Contents
show netdestination
show netdestination <netdestination name>
Description
Displays IPv4 and IPv6 network destination information.
Syntax
No parameters.
Example
Issue this command to display all netdestination configured on this controller. The output below displays
information for all configured IPv4 and IPv6 netdestinations. To display additional detailed information for an
individual netdestinations, include the name of the netdestination at the end of the command.
(host) >enable
Password:******
(host) #show netdestination
Name: white-list
Position Type IP addr Mask-Len/Range
-------- ---- ------- --------------
Name: localnetwork
Position Type IP addr Mask-Len/Range
-------- ---- ------- --------------
1 network 0.0.0.2 0.0.0.0
Name: store
Position Type IP addr Mask-Len/Range
-------- ---- ------- --------------
1 override vlan 55 offset 36
The output includes the following parameters:
Parameter Description
Name
Network destination name
Position
Network destination position
Type
Network destination type
IP addr
IP address of the network destination
Mask-Len/Range
Network destination subnet mask and range. If the netdestination object has a
defined domain or host name, that value will appear in the mask-Len/Range
column.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show netdestination | 1738