Concept Guide

show pan-options
show pan-options
Description
This command displays configured options to integrate a branch controller with a Palo Alto Networks (PAN)
firewall.
Syntax
No parameters.
Usage Guidelines
Issue this command to view Palo Alto Networks firewall integration settings for branch, standalone or local
controllers. Note that the PAN firewall integration feature can only be used on standalone or local controllers
when used in conjunction with the controller uplink VLAN manager feature, which must be enabled using the
uplink command in the controller command-line interface.
Examples
(host)# show pan-options
Configure Palo Alto Networks options
------------------------------------
Parameter Value
--------- -----
Portal IP for Palo Alto Networks Global Protect portal-ip 172.16.2.1 cert cert_LSVPNCert
The output of this command contains the following parameters:
Parameter Description
Value
This column contains displays the following parameters for Palo Alto
firewall integration feature:
l portal-ip <ip-addr>: The IP address of the firewall management portal
l cert <cert-name>: Name of the self-signed or external certification
authority (CA) certificate to sign the controller and gateway server
certificates
Related Commands
Modification
pan-options
This command configures options to integrate a branch controller with
a Palo Alto Networks (PAN) firewall.
ip nexthop-list
Define a nexthop list for policy-based routing.
pan active-profile
This command selects an active Palo Alto Network (PAN)profile from a
set of profiles.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show pan-options | 1766