Concept Guide

ap mesh-ht-ssid-profile
ap mesh-ht-ssid-profile <profile-name>
40MHz-enableba-amsdu-enable
80MHz-enable
clone <source>
high-throughput-enable
ldpc
legacy-stations
max-rx-a-mpdu-size
max-tx-a-mpdu-size
max-tx-a-msdu-count-be
max-tx-a-msdu-count-bg
max-tx-a-msdu-count-vi
max-tx-a-msdu-count-vo
max-vht-mpdu-size
min-mpdu-start-spacing
mpdu-agg
no
short-guard-intvl-20Mhz
short-guard-intvl-40Mhz
short-guard-intvl-80Mhz
stbc-rx-streams
stbc-tx-streams
supported-mcs-set
temporal-diversity
Description
This command configures a mesh high-throughput SSID profile used by mesh nodes.
Syntax
Parameter Description Range Default
<profile-name>
Enter the name of an existing mesh high-
throughput SSID profile to modify that
profile, or enter a new name or create a
new mesh high-throughput profile. The
mesh high-throughput profile can have a
maximum of 32 characters.
To view existing high-throughput SSID radio
profiles, use the command show ap mesh-
radio-profile.
default
40MHz-enable
Enable or disable the use of 40 MHz
channels. This parameter is enabled by
default.
enabled
80MHz-enable
Enable or disable the use of 80 MHz
channels.
enabled
ba-amsdu-enable
Enable/Disable Receive AMSDU in BA
negotiation.
enabled
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap mesh-ht-ssid-profile | 177