Concept Guide

178| ap mesh-ht-ssid-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
clone <source>
Copy configuration information from a
source profile into the currently selected
profile
high-throughput-enable
Enable or disable high-throughput (802.11n)
features
on this SSID. This parameter is enabled by
default.
enabled
ldpc
If enabled, the AP will advertise Low-density
Parity Check (LDPC) support. LDPC improves
data transmission over radio channels with
high levels of background noise.
enabled
legacy-stations
Allow or disallow associations from legacy
(non-HT) stations. By default, this parameter
is enabled (legacy stations are allowed).
enabled
max-rx-a-mpdu-size
Maximum size of a received aggregate
MPDU, in bytes.
8191,
16383,
32767,
65535
max-tx-a-mpdu-size
Maximum size of a transmitted aggregate
MPDU, in bytes.
1576 -
65535
max-tx-a-msdu-count-be
Maximum number of MSDUs in a TX A-
MSDU on best-effort AC. TX-AMSDU
disabled if 0.
0 - 15 2
max-tx-a-msdu-count-bg
Maximum number of MSDUs in a TX A-
MSDU on background. TX-AMSDU disabled
if 0.
0 - 15 2
max-tx-a-msdu-count-vi
Maximum number of MSDUs in a TX A-
MSDU on video AC. TX-AMSDU disabled if 0.
0 - 15 2
max-tx-a-msdu-count-vo
Maximum number of MSDUs in a TX A-
MSDU on voice AC. TX-AMSDU disabled if 0.
0 - 15 0
max-vht-mpdu-size
Maximum size of a VHT MPDU. 3895, 7991,
11454
11454