Concept Guide

show rf dot11g-radio-profile
show rf dot11g-radio-profile [<profile>]
Description
Show an 802.11g Radio profile.
Syntax
Parameter Description
<profile>
Name of a 802.11g profile.
Usage Guidelines
Issue this command without the <profile>parameter to display the entire 802.11g profile list, including profile
status and the number of references to each profile. Include a profile name to display detailed configuration
information for that profile.
Examples
The example below shows that the controller has four configured 802.11g profiles. The References column
lists the number of other profiles with references to the 802.11g profile, and the Profile Status column
indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status
column
(host) # show rf arm-profile
Adaptive Radio Management (ARM) profile List
--------------------------------------------
Name References Profile Status
---- ---------- --------------
airwave 4
default 4
no-scanning 1
nokia-rf-profile 1
Total:4.
This example displays the configuration settings for the profile airwave.
(host) # show rf dot11g-radio-profile default
Parameter Value
--------- -----
Radio enable Enabled
Mode ap-mode
High throughput enable (radio) Enabled
Channel N/A
Beacon Period 100 msec
Beacon Regulate Disabled
Transmit EIRP 15 dBm
Advertise 802.11d and 802.11h Capabilities Disabled
TPC Power 15 dBm
Spectrum load balancing Disabled
Spectrum Load balancing mode channel
Spectrum load balancing update interval (sec) 30 seconds
Advertised regulatory max EIRP 0
Spectrum Load Balancing domain N/A
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show rf dot11g-radio-profile | 1853