Concept Guide

Table Of Contents
show snmp trap-hosts
show snmp trap-hosts
Description
Displays the configured SNMP trap hosts.
Syntax
No parameters.
Example
The output of this command shows details of a SNMP trap host.
(host) # show snmp trap-hosts
SNMP TRAP HOSTS
---------------
HOST VERSION SECURITY NAME PORT TYPE TIMEOUT RETRY
---- ------- ------------- ---- ---- ------- -----
10.16.14.1 SNMPv2c public 162 Trap N/A N/A
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show snmp trap-hosts | 1891