Concept Guide

hardware types, but you can use the usb commands in this profile to configure a RAP to recognize and use an
unknown USB modem type.
Related Commands
Command Description
provision-ap Change provisioning parameters for an individual AP. This command does
not save the provisioning parameters settings in a reusable profile.
Example
The following commands create a provisioning profile named profile_branch, in which the cellular link is the
primary uplink because it has a higher priority than the Ethernet link:
(host) (config) #ap provision-profile profile_branch
link-priority-cellular 2
link-priority-ethernet 1
usb-type acm
usb-modeswitch "-v 0x106c -p 0x3b06 -V 0x106c -P 0x3717 -M
5534243b82e238c24000000800008ff020000000000000000000000000000"
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.4 Introduced support for the following parameters:
l usb-dev
l usb-dial
l usb-init
l usb-passwd
l usb-tty
l usb-type
l usb-user
l link-priority-cellular
l link-priority-ethernet
ArubaOS 6.0 The uplink-vlan parameter was introduced.
ArubaOS 6.1 The following new parameters were introduced for provisioning APs for
802.1X authentication:
l apdot1x-passwd
l apdot1x-username
The following new parameters were introduced for provisioning Remote
APs using USB modems:
l usb-modeswitch
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap provisioning-profile | 193